Who and Salerno-Naples and can help me fix my BDM?

[giuseppe1374]

surely this bdm you will be? sprogrammato and from my experience I can say that to others ? also happened when not used for a long period of time or for the wrong operation type plug it in when you install the soft, or opening a different version, then the second relay attacks when you take on with the ecu connected.according to me you should me to send it so you shelter I have repaired the dell other to other friends, if not to make you, tell me in short, so I don't think it will handle the spider from the hole

[special]

surely this bdm you will be? sprogrammato and from my experience I can say that to others ? also happened when not used for a long period of time or for the wrong operation type plug it in when you install the soft, or opening a different version, then the second relay attacks when you take on with the ecu connected.according to me you should me to send it so you shelter I have repaired the dell other to other friends, if not to make you, tell me in short, so I don't think it will handle the spider from the hole

then I confirm that very probably c'? to program the motorola?

[giuseppe1374]

I confirm to you that can? be in the micro the problem, but of course I have to have it in my hands to give you the certainty to my advice and fix it and then you can go quiet on the ecu that you need to do

[special]

I confirm to you that can? be in the micro the problem, but of course I have to have it in my hands to give you the certainty to my advice and fix it and then you can go quiet on the ecu that you need to do

but to program the micro is only by means of the upa? or c'? way through the jtag, I made a jtag cable with the parallel port to accommodate the decoder and modem may be good?

[special]

I have already? the file to program the micro..

[giuseppe1374]

I can not say if the cable you have you can you? maybe it is, I use xprog and the upa for the various micro

[giuseppe1374]

thanks daniel l, I discovered later, but now I think I have solved the problem

[s3alex]

I resume this old discussion because? I think I have the same problem.
I can not let go of a BDM100 in any way. Windows sees it as "FTDI <-> Serial converter"
I tried to use MProg, but I can't find the parameters to taste. Could someone send me the file for the EPT?
All the software and executables that should do the upgrade of the firmware does not detect the device and give error "Error opening device."
I've tried both "flash_bdm.exe" that the various executables "1.exe" and "2.exe"
I have a Willem ? need to reprogram the various eprom.
Thanks to anyone give me a tip!!