as a first try? try it with some other machine and you do? know now I go hello
as a first try? try it with some other machine and you do? know now I go hello
Then from the Test that you do in the options, you from that ? everything ok? You get a screen like this?
http://www.ross-tech*****/vcds/tour/908/options-tests.png
l power obd ec'... the doors are set well???
What is a hare? A rabbit Abarth
will I get a screen like the oneOriginally Written by cawadany
for the power supply in the obd, there should be no problems why? autocom enters without problems, when I plug in the vcds, the led turns red for a few seconds and then turns off, the gates I left checked the usb, I have not yet tried it on another vehicle due to lack of time, greetings
Strange behavior of the led. My when I connect it to the obd, the led turns red and after a moment it turns green.... I would not like that your cable is defective.
Maybe a short circuit on the line K?
I read in another forum once interfaces defetose. Have to resolder the contacts, and everything worked once again.
According to me c'? something that does not work when it is connected to the drive and is to be given power. If it was the classic sprogrammazione of the cable, or if there are any problems with the dialogue between the pc and the interface, the test should not be to a good end.
hello guys, thanks to all of you for your help, for the moment, I have not managed to try it on another machine to be able to understand if it is only with the scirocco where I have tried, I bought it just because? my son has that car and I said that you can activate some of the things that I really do not know yet what they are for? I have read a p? around and it seems to me that it is a p? delicate seen that many often speak of reprogramming and that also is not so easy to understand how to operate the changes
Even though it is in German, but here you will find almost everything that you can program the following:
http://www.stemei.de/pages/coding/vw-scirocco-iii.php
Write permission
Quote