Experience reading Marelli Fiat Doblò 1.3 mj

[hackgen]

Read perfectly, only that you must have the foresight to use speed? low then recovery mode.

I hope this information was useful.

the magpro then able to read the marelli? or is he the virtual reading?

[hackgen]

I have version 4.2

Read perfectly, only that you must have the foresight to use speed? low then recovery mode.

I hope this information was useful.

[sportknight]

the map with the mpps can easily insert a condition that is cut to 1mb as a guide

[sportknight]

I believed that the 6f3 with the serial you could only write,be,better, cos?!!

[sportknight]

sorry guys,with the mppsv5 I'm trying to play with a 6f3 to the tour but I can not do the ecuid,why?

[sportknight]

mm,I know that should be used can line but I can't find the pinout can, therefore,someone has?

[hackgen]

I mpps 12 I had no problems to read the ecu via the serial port.

sorry guys,with the mppsv5 I'm trying to play with a 6f3 to the tour but I can not do the ecuid,why?

[matteo87]

so, you had several options?:
given that you've talked before about the mpps, it was enough to find in the network the file ori I think you need the, MJD6F3HW03R Num SW: 3058D166 that are the data that you get when you make the id,because you can't read with mpps, did the changes that you were interested in, and cut them to the file to 1 mb, you will find the guide in the forum, or as you have done with magpro, or better in the bdm. anyway, the data that you needed x research were MJD6F3HW03R Num SW: 3058D166.

To me the split file to 1 mb it has not worked! on the contrary, at 43%? blocked everything! luckily there was a friend with cock ori and I managed to capture the control unit!

[sportknight]

I mpps 12 I had no problems to read the ecu via the serial port.

the 70cv the read and write but the others are not...the only write

[Danny]

I the first time I wasn't able to read it to me ? closed MPPS, but I think it depended on the fact that it was about Seven...luckily now I have XP.
Ah, I tried to read a Swift 69 hp. 1433Y196 as the ecu code. The second time however, the reading was good... Maybe tomorrow I try to write it, even if I'm scared, not a little.