Recalculation of the columns

[mariodarkblue]

The table here on the forum to me is the whole offset
does not keep the rows and columns

TABLE 16x20 grommet:
Injector Duration Table
x=mm3/str
y=bar
z=µsec.

Ah here...want to know how to calculate the times for a IQ different from the one that you find in the bp...well, look at it ? a speech a p? complicated...why? you must take into account the pressure of the rail...I advise you to keep as much as possible and the bp of the original, where you need to go up with the amount? IQ see some of the other ecu's similar to yours, and copy all of the time...but if you have to calculate them....I can go to the formula that I use...explained in another forum (I can do it without breaking the rules?)

[megamind]

But the formula does not think is covered by a copyright...if you're afraid there are always the pm

[mariodarkblue]

hello...here is the formula that I use...Tinj=(IQ*(K)/√Prail

as you can see, the times are related both to the rail pressure that the K-factor....of course the K te the revenues with inverse formula...

[megamind]

hello...here is the formula that I use...Tinj=(IQ*(K)/√Prail

as you can see, the times are related both to the rail pressure that the K-factor....of course the K te the revenues with inverse formula...

Good' but I don't know' what' the factor k, where I go to extrapolate?

[mariodarkblue]

the K-factor ? a constant that makes revenue through inverse formula...for example...you're on the curve of the 1,400 bar...you know that for 80mm3 you need 1200us...you calculate the K of the curve...and then you will be? easy to calculate the new tinj given k, the pressure and the iq

[megamind]

I need an example prarico and real, I come back a little complex the explanation..
maybe when you have the chance? to see the table I posted me a hand to recalculate the column.
Thanks for the tips

[mariodarkblue]

Then..? simple and I don't need to see the table...
For example, I have that:
PRAIL 1400bar
IQ 70mm3
Tinj 1240us
K= (√Prail * Tinj)/ IQ
K=662.8
I've calculated the K-factor for the curve ? 662.8...
Now, to calculate the new tinj, user? that K...
Suppose that you enter 80mm3 in bp
Tinj=(IQ*(K)/√Prail = (80*662.8)/sqrt1400=53024/37.41=1417

here

[CHIP TUNNING]

Then..? simple and I don't need to see the table...
For example, I have that:
PRAIL 1400bar
IQ 70mm3
Tinj 1240us
K= (√Prail * Tinj)/ IQ
K=662.8
I've calculated the K-factor for the curve ? 662.8...
Now, to calculate the new tinj, user? that K...
Suppose that you enter 80mm3 in bp
Tinj=(IQ*(K)/√Prail = (80*662.8)/sqrt1400=53024/37.41=1417

here

Sorry mariodarkblue, are ignorant of rimappature but I know I can do a bit of accounts and I have made many first to tell you that with your formula if you increase the 10% of the IQ, the increase of the time will be? always 10 %

[megamind]

Sorry mariodarkblue, are ignorant of rimappature but I know I can do a bit of accounts and I have made many first to tell you that with your formula if you increase the 10% of the IQ, the increase of the time will be? always 10 %

To me that doesn't add up. Practically you say that if you increase to a 10% IQ ricalcoleresti the whole column in the times by adding a 10%?
But the column if you see the increases in data from the house does not correspond to a fixed percentage, but variable.

[munro]

sorry eh...but if the formula ? the one posted by mario I will go to impelagare with the percentage??