if it is written in the bdm reset the counterOriginally Written by checcosassu
if it is written in the bdm reset the counter
while the others are still talking about us, we have already solved the problem
GARAGE0864 ԼЄƓЄƝƊƛƦƳƧԼƛVЄ
a replacement ecu ? can?
if you change the data of the eeprom dissaldandola or by using the bdm you will not see anything..
otherwise, if when you remap a or do an upgrade in fiat (leaves traces programming the flash or m58 with a progrmmatore to the serial port as mpps; wing nut; mag).
Quiet me ? happened to me on a car with proprerio "unipropetario" the car is the following I think is a small error in reading.
Hello
uses another diagnosis..but I think that it is climbing ! take the ecu and see if ? was open!
the diagnosis of other cars says the km right with a small tolerance of error
well 3-4 % of tolerance ? a problem..
also I have noticed such a difference on some machines
I tried fiatecu scan on different cars:
alfa 147 2004 jtd km framework 113456km, fiat ecu scan 143798km
fiat grande punto 1.6 mjet..framework 81000, fiat ecu scan 79867 km
fiat punto 1.2 8v framework 107678km *********** 106548km
fiat punto 1.2 8v framework 123564km fiat ecuscan 136728km
in principle, we
ps all of the cars in question were mapped to the 2 point, the big point and the 147, except for the 147 was the n entry. of programming, in the 147 does not check the item no.reprogramming..sar? that is not supported or the other
Write permission
Quote