Hello to all I have a problem with the diagnosis autocom I try to enter the code of the injectors, but from the error... 2 injectors are coded 2 no... The machine is not good pu? be the problem?you know what prevents the encoding? You need a different diagnosis ? Thank you in advance
which error? use the software autocom or delphi?Originally Written by freddyecu
Autocom no error, only that if I check in the parameters of the codes injectors relative to the cylinders 1 2 3 4 there are if I try encoding it does not take them
but if you try to change the encoding on the injectors coded , you do to change?. you should make sure that what autocom tells you is right! a friend with another diagnosis do you have? .
It does not take them the codes from error but if I try on another ford focus the codes are perfectly
you should perovare with another diagnosis ? said that you can do everything with autocom
while the others are still talking about us, we have already solved the problem
GARAGE0864 ԼЄƓЄƝƊƛƦƳƧԼƛVЄ
hello, time ago I ? such a thing happened, with a diagnosis bosch kts at a workshop we could not encode the injectors, after several attempts to pass the first to the fourth and so on? via, we unplugged the battery for a bit and then once a go-around, we coded the injectors.
Quoto!Try to do so?, I also worked for? the machine should fit the same......
Write permission
Quote