Page 1 of 2 12 LastUltima
Results 1 to 10 of 15
  1. #1
    THE AVERAGE USER
    Date Of Registration
    Jan 2013
    Messages
    149

    sostituzzione pads rear audi a4

    hello, I wanted a board for the sostituzzione of these brake pads on the a4 ? only possible with a diagnosis thanks

  2. #2
    BEGINNER
    Date Of Registration
    Jan 2013
    Messages
    36
    I'm sorry, but I did not understand very , that you need the diagnosis to change the tablets? has the automatic brake in the ascent or descent of the machine? of what year ?? it is not me anyway, disassemble, cross-references back to the plunger by rotating it and pushing it at the same time , if the push only, does not fit, also to be rotated in a clockwise

  3. #3
    THE AVERAGE USER L'avatar di giarras
    Date Of Registration
    Jun 2012
    The resort
    panormus
    Messages
    1,735
    note that in some models(not all) when c'? the light turned on, and replace the front ones need the diagnosis of x, a procedure to give the value of the poppet closed and thickness strain otherwise the light does not go away type bmw..
    [COLOR="#FF0000"]There is a driving force stronger than steam, electricity and atomic energy: the will[/COLOR].

    [COLOR="#FF0000"]personal Opinions, for educational purposes only.[/COLOR]

  4. #4
    THE ACTIVE USER L'avatar di carlo abarth
    Date Of Registration
    Nov 2012
    The resort
    VESUVIUS
    Messages
    1,521
    if it is a 3000 tdi only a diagnosis!!
    What is a hare? A rabbit Abarth

  5. #5
    BEGINNER
    Date Of Registration
    Jan 2013
    Messages
    36
    the cio? from diagnosis if they go back the pistons?
    think, I know that work in this way some of the new car, but so far not me ? ever happened to you.
    do you know if autocom cell'has this function?

  6. #6
    THE ACTIVE USER (FO) (OF) L'avatar di legendaryslave
    Date Of Registration
    Dec 2012
    The resort
    RAIANO(AQ)
    Et
    44
    Messages
    1,985
    you have to make recoil piston and replace the tablets then adjusting the thickness when you have finished all
    while the others are still talking about us, we have already solved the problem
    GARAGE0864 ԼЄƓЄƝƊƛƦƳƧԼƛVЄ

  7. #7
    BEGINNER
    Date Of Registration
    Jan 2013
    Messages
    36
    then c'? on the autocom!
    thickness control, I guess this is the action the electronic equivalent of the mechanical pump to again approaching the paste to the disk after the replacement right?

  8. #8
    THE AVERAGE USER
    Date Of Registration
    Feb 2013
    Messages
    184
    Just a 9v battery to return the pistoncini.E clear that this is the case that you do not have a diagnosis.

  9. #9
    THE ACTIVE USER (FO) (OF) L'avatar di legendaryslave
    Date Of Registration
    Dec 2012
    The resort
    RAIANO(AQ)
    Et
    44
    Messages
    1,985
    Citazione Originally Written by neo Visualizza Messaggio
    Just a 9v battery to return the pistoncini.E clear that this is the case that you do not have a diagnosis.
    and then adjusting how do you do ?
    while the others are still talking about us, we have already solved the problem
    GARAGE0864 ԼЄƓЄƝƊƛƦƳƧԼƛVЄ

  10. #10
    THE ACTIVE USER (FO) (OF) L'avatar di legendaryslave
    Date Of Registration
    Dec 2012
    The resort
    RAIANO(AQ)
    Et
    44
    Messages
    1,985
    Citazione Originally Written by marco1985 Visualizza Messaggio
    then c'? on the autocom!
    thickness control, I guess this is the action the electronic equivalent of the mechanical pump to again approaching the paste to the disk after the replacement right?
    I think I own that on autocom we both go on the brake you should make without problem
    while the others are still talking about us, we have already solved the problem
    GARAGE0864 ԼЄƓЄƝƊƛƦƳƧԼƛVЄ

Page 1 of 2 12 LastUltima

Write permission

  • You you can not post new threads
  • You you can not send answers
  • You you can not send attachments
  • You you can not edit your posts
  •