Replacement framework new beetle

[micheleyr6]

you have the number part of the picture?so, I can say with certainty

[gimarras]

On the label contains this data : 008VWZ5Z0Y2146072U ,
then under the bar code 1C0920800A , VER V07 , 4.40. Are these?

[micheleyr6]

hello..is this the code that I needed...1C0920800A....
you need to read the micro-68hc912d60

[gimarras]

Should I desolder and read with UPA (with adapter which I think is not among those included), or is there a sort of pin out?

[micheleyr6]

I would try it first without the desolder should read it...in the service manual, upa ec, the pin out..
let me know if you find otherwise, you try I am

[gimarras]

Ok I will try. Thanks

[gimarras]

Tried reading, but nothing. I attach the photo of the link that I found on the guide but I don't know the UPA and probably wrong settings. Are only 4 wires you need to connect?
The pin 9 mi from 1.05 volts, and reports it as the wrong value. I have to feed the 12 v ?

[micheleyr6]

hello unfortunately I can not download...
in the manuals the upa, there are two micro 68hc912d60,the first with 80-pin, and the second with 112-pin...your is with the 112 so you have to consider what it is right??
on pin 9 upa must be 5v you powered the upa with 12v?now I point you to the pin-to-follow
p9 upa p12vddmicro
p5 p14vss
p6 p23bkgd
p7 p46reset
you as connected?

[micheleyr6]

hello to retried??

[gimarras]