manual for beginners for ECM Titanium

[pitty]

the modified file, you can check just by having the file ori compatible or a similar one to align the map to the map,the file ori are, or their own assistance, or a great forum called professionalchiptuning that has created a section that is named the file request golds and a section database file ori where the inside sorted by brand and model, there are thousands of file ori hahahaha.

I fully agree, eh eh eh, even if I don't yet know this section and how it works and who it can? access!

Especially if the sw are different not it is convenient to use the copy increases, but use the 2d align and copy the curve to the curve, being careful also to acts that are sometimes different.

what are the b.p.? for comparison, I realized that I should open the mod file as the original titanium and then select one by one the drivers and go to compare 2d, seeking to align, right?

[pitty]

align the map means:

open the map with ecm titanium. You will see definitely that the values will all be staggered. Open in 2d and you'll see that the curves (red and blue) are completely staggered, maybe ? pi? next, and a ? pi? back. At that point, clicking on the lock icon gold or blocks mod and scroll the map until you see that the curves overlap and you will see the proper gains that have been made! Correct me if I'm wrong, I know it only as a theory!

[megamind]

And' so'. It's easy enough, unfortunately, if there are many maps touched you lose a little bit of time, but we realize the differences even out of driver, so I think the best thing to do and, above all, do not make a mistake if there are parts in more or less of the map.

[antonio.o]

thanks you know I'm just a neinato on this world so I tend to become an adult for the purpose of personal and not as a job.
hello.

[davide2000]

align the map means:

open the map with ecm titanium. You will see definitely that the values will all be staggered. Open in 2d and you'll see that the curves (red and blue) are completely staggered, maybe ? pi? next, and a ? pi? back. At that point, clicking on the lock icon gold or blocks mod and scroll the map until you see that the curves overlap and you will see the proper gains that have been made! Correct me if I'm wrong, I know it only as a theory!

I'm the one that's still not me ? clear the increments we think ecm titanium to make them?
I how do I figure out how much should I increase?

[leandro89]

I'm the one that's still not me ? clear the increments we think ecm titanium to make them?
I how do I figure out how much should I increase?

for ecm titanium you need to tell you how much and where to increase, to understand how much you need to increase or you do a course cos? as I did at the professionalchiptunig, or if you have so much time ****** you have to trying hard the different types of ecu do several tests.

[pitty]

Who you are writing to ? identical to you! neonatissimo!

[marco147150]

Hello, talking in some cases to realign the maps ori and mod, if you are not in the ecm sees as changes and when you save it keeps so well? ? or does not affect saving ?

Thank You, Marco.

[megamind]

If you do not riallinei maps you d? the high values are not comparable, why? precisely not aligned.
If you upload 2 softwere different ori and mod. when you save the mod. will stay? always mod. and not the avr? nothing of the ori.

[davide2000]

but after they make the change to the program warns you if you're wrong?for example, a value that is too high?