Knock sensor smart

[neo]

Another thing ;if the error and P2006 for sure, is that the problem and the wiring or the sensor because this error tells you that there is missing a signal from the sensor

[neo]

At this point, change the address .You need to check the wiring or the sensor .Hello and good Sunday

[usardaun]

gave me error 06, knock sensor!

[neo]

I think they sie the same thing .Do the tests I said.Watch ******** l error P2006.

[usardaun]

But that problem can? you give them? the machine the guide a girl and anyway I said that it is okay!! that problem can? give this knock sensor?

[neo]

This sensor records "noise"anomalous, and in case of necessity destinations in the engine recoveri

[chicco]

Not ? said that the place for force in the recovery, can? also simply remove a few degrees of advance or slightly lowering the prex turbo until the "noise"(detonation) does not disappear, ? can the driver not noticing.

[neo]

could not agree more,that was just a sample I made

[chicco]

You I figured it out, I just wanted to note that sometimes, certain strategies may not be felt by those who use the machine, then in this case if the problem ? a power outage is probably not implemented no strategy.