problem lancia ypsilon 1.3 mjet

[pinotuning]

I don't think that it has the variable geometry if ? the 75hp, however, the catalyst is clogged it could be !
most times I ? happened to clean it on a large point of no fap

[usardaun]

Take a look at the fuel filter!!!!

[michele30]

the machine does not ? with geometry, but in the end I solved it.. at least I hope
it was the turbo that was shot, never happened but here is the truth? the two nuts are turned upside down, all opposite of the other.
By doing so, the valve download left the headstock of the exhaust pressure a little open ? this below was zero, and about three thousand went.
however, I do not understand how he did it , why? the screws that hold the nut were tight and you could not see the sign that was moved, I think, but I have not found the solution, maybe a knock then the exhaust but nothing ? it was all perfect .
tomorrow is the feeling well on the road , but I think that everything is ok
many thanks for the advice all

[pinotuning]

I'll explain how to ? success ?? the car has had an accident !! happens often on these cars
hello

[michele30]

if I have to tell you I don't know, anyway ? a customer who is often in the workshop and the machine does not seem slammed, but when it comes to the withdrawal, she informed me.
strange.

[carlo abarth]

often it happens.. you had mentioned in the previous post!!

[pabloescobar]

Check if the file has ori on the ecu and if ? so compare the actual values with those objectives of the mass air flow sensor

[pinotuning]

Check if the file has ori on the ecu and if ? so compare the actual values with those objectives of the mass air flow sensor

it has already solved !