BDM - Clarification

[fa2st]

that difference between the bdm and the boot mode?? thanks guys.....

[msport (exil77grande)]

that difference between the bdm and the boot mode?? thanks guys.....

the bdm are the tips that lean (schedule spring) or weld directly on pitches inside the unit,instead of the bootmode are links to tour on the ecu connector.

[max75]

everything written in the bdm....emptied fap....diagnosis there are no errors ...for the moment, it seems to me that it's okay.....

[panny200555]

no do you read the file with the bdm and copy the missing areas in the serial above the bed, and you create the complete file

hello,

I am in the same situation.

I have a edc16c39 CAN and that is me, I tried to write with mpps12 me ? locked the ecu (among the other not I was putting a mod file but just files Gold read a little while ago).

Now I find I have a file ori read in serial with mpps (2mb). On the days I get the BDM. and I have understood the concept of reconstructing the file.
The Cio? I read the current dump corrupted in bdm and intact file ori read with mpps, and then rewrite everything with the Bdm. Until here we are.
But how do I repair a flash part mapperovinato from mpps?

Doing some research I realized that you can? to do with ECM... by copying and pasting the parts in question... what? I take the maps that I see in the file ORI(2mb) read with mpps(approximately the last 25% of the file) and the ricopio in the file corrupt flash read with bdm??

am I right??
please correct me if I'm saying too many caxxate...

thanks

[msport (exil77grande)]

exact + or - so of course you need to understand the area what it is.

[frantik3]

exact + or - so of course you need to understand the area what it is.

exact!!!!!!!!!

[panny200555]

A little help on this??
Thanks

[frantik3]

when you read and write files, and in case we can help you rebuild it

[panny200555]

Thanks frantik3,

Today I ? arrived at the bdm100 clone. Before working on my unit I wanted to do some testing on an ecu taken from a crashed car by(alfa 159).

The ecu ? the same that I have on my car is that? edc16c39. I have installed and using the jig and all the connections I read the ecu with the option of full backup.

I did the read only:
- 29BL (? flash? I think of you why? exporting from file (2 mb)
- Serial E2prom (what?? definition?)

But lacks the reading of the "MPC5XX Flash" (? micro true?) how ever it is not reading from the micro? what is the reading of the micro-cio? ? optional?
thanks

[legendaryslave]

Thanks frantik3,

Today I ? arrived at the bdm100 clone. Before working on my unit I wanted to do some testing on an ecu taken from a crashed car by(alfa 159).

The ecu ? the same that I have on my car is that? edc16c39. I have installed and using the jig and all the connections I read the ecu with the option of full backup.

I did the read only:
- 29BL (? flash? I think of you why? exporting from file (2 mb)
- Serial E2prom (what?? definition?)

But lacks the reading of the "MPC5XX Flash" (? micro true?) how ever it is not reading from the micro? what is the reading of the micro-cio? ? optional?
thanks

in these units, the micro contains the bl and then did you read it ? the complete reading of the bl