[IMG]http://bannerbreak*****/banners/3/563/135700419269659378.gif[/IMG]
Can I know what is the turn off valve is and what are the benefits ? Thank you in advances
the removal of Swirl reduces the risk of disruption caused by their possible rupture; these valves are used to generate turbulence, which should help the combustion but are subject to breakage; removing them physically, it also makes it necessary to remove the ECU.
I still can't read the file, I wanted to know if the guide ? also valid for jtdm 16 v of the 147... thanks
if you remove physically I can guarantee ke if you leave the actuator connected to the control unit nn acknowledge anything I have already? made many ... on the contrary, if right do I have to be precise, I out only the connecting rod between the actuator and the butterflies and cn a bracket, to lock in the open position, the swirlingin this way, nn devi pi? remove the manifolds ke ? a real challenge
![]()
The actuator of the swirll in each case must be left plugged in otherwise the unit give? the failure of C. A or C. C, the thing is that if you do not delete it you will have that starting dead in the low revs, and not only that, I collectors I remove them always because, a bellapulizia never hurts, and most of the times I have found the valves detached..
with the actuator connected no light....