Which protocol to use with magpro2 x Large Point of 1.3 mjt

[polini]

Hello does anyone know which of the 2 select with the magpro,I have to make a big point of 1.3 mjt 75hp and I already have the file ori I wanted to know in advance which protocol to use

happened or m58bw016 I enclose a photo unit

[admin]

To be safe you should open the ecu and see what fits,but to 99%, and a m58bw016

[FidodidoTuning]

On mpps, if you write spansion or m58 and the same protocol,according to me and the same thing
If you have a mpps do first and go for sure. ...
Do you know ke you need anke micro to write it with the mag?

[polini]

I don't know, explain to me the micro ?

[polini]

Thanks x the answer

[polini]

On mpps, if you write spansion or m58 and the same protocol,according to me and the same thing
If you have a mpps do first and go for sure. ...
Do you know ke you need anke micro to write it with the mag?

explain to me the micro ?

[Giacomo]

to be sure open it and see what c'? written on the processor, if a spansion, I advise you to do it in the bdm, and not in the obd

[Giacomo]

with galletto 2 almond-do it safely.

[frantik3]

the micro with the magpro does not have all the ecu serves and they ask you, however, if he asks the micro, ask here on the forum or read the whole bdm and do it before

[msport (exil77grande)]

I don't know, explain to me the micro ?

basically, the magpro, in many cases, when you write a 1.3 mjet 75-90hp asks well as mpc that you get from reading bdm backup everything,then how would you have advised or read and write in bdm and then eventually if you have to do other tests directly write in the serial since you have the backup, and even the mpc, or in serial with mpps.