29f010b are compatible with 27C020 645F?

[chicco]

you have to see if the unit starts to read from 0000 or 2000, if it starts from 0000 no problem I think, but if it starts from 2000 finds nothing.I with the old tdd 039 where the map was, if I remember correctly that is contained in a 27c128 dil, I used a 27c256 where in the first part I put on the map and in the second to another map, then there was a pin of the eprom that if the hop-state logic high(5v) was the work of a map, while if you put a low(ground) worked the other.

[Quattro]

you have to see if the unit starts to read from 0000 or 2000, if it starts from 0000 no problem I think, but if it starts from 2000 finds nothing.I with the old tdd 039 where the map was, if I remember correctly that is contained in a 27c128 dil, I used a 27c256 where in the first part I put on the map and in the second to another map, then there was a pin of the eprom that if the hop-state logic high(5v) was the work of a map, while if you put a low(ground) worked the other.

Boh!... Gi? that we are, and I see that you have experience on the 27c128 dil, I have a Delta integrale that I would like to map, only that I can not find the 27sf128/256, why? I would like to avoid buying the uv oven.... you could give me some clarification? You have had the experience on these ecu's?

[rgiubert]

with ECM2001, you can double the file by 1 M with the eprom, 2M then the question changes if you want to make 2 maps in the same eprom and swicharle as did the FIAT Multipla Bi Power with the same ecu.