guys,I have mapped many of the 159, but this is making me sweat
? a 159 1.9 mjtd 150 qtronic
has sw and hw 908-576
the mappo with mppse not part of it,I put back the original and started again
I try to remove the dpf on the original part
I put back the modified and not part...
and yet I don't think I have anything wrong..
the map should be ok,you can take a look?
attach the original
please, when posting a mod file you have to put also the ori,so it is + easy to give an opinion + immediate.Originally Written by sportknight
[COLOR="#FF0000"]There is a driving force stronger than steam, electricity and atomic energy: the will[/COLOR].
[COLOR="#FF0000"]personal Opinions, for educational purposes only.[/COLOR]
here is the original
sisi,I was convinced that I have put it in the archive
on a few occasions on these cars for my problem were the curves of the rail
try to change everything except those.
and not leaving for the rail?
can you please post the file luca stanca the car??? I have to check 1 bit!!
it seems strange to me that the nn part because of the curves of the rail..... I'm on this ecu, I have done a million tests, I part in all conditions.... I would not want a few bits that nn'!!! what you did with the luca stanca???
with only luca stanca part,then when I go to copy the increments on the file luca stanca the car is not starting
Write permission
Quote