BDM - Clarification

[magi1984]

the kess v4.2 ? the clone of kess v1, not hit a bat with kess v2

[tezzero]

Sorry I do not have noticed, but I wrote a*******ta..I had seen in the sales of the kess .. I thought I would help you out..but I have done a figure-of-M...(I am not familiar with the tool) Forgiveness...

[marcomjet]

I was referring to the kess V2 original clone does not exist, even if some pretend to be this

[sportknight]

I don't have a bdm but me ? seemed to understand if we have to read in the serial
if we have problems, we can open the ecu and read with bdm
through the ecm, we can then align the 2 units is read,the serial and the bdm damaged and then copy the original serial on the bdm with the appropriate function

instead, what I have not understood ?,how it behaves with the cecksum?

[marcomjet]

the checksum is detected and corrected, if necessary from the ecm...

[matd82]

the checksum is detected and corrected, if necessary from the ecm...

only if the driver ? correct and good, otherwise the change but nn correctly.

[alex68]

only if the driver ? correct and good, otherwise the change but nn correctly.

we quote in full

[max75]

question .....when I go to read the file in the bdm is a different bed in the serial.....example, I read with mpps a bosch edc1634 gave me a 2 mb file....then for safety I have also done in the bdm.....I have to say that they are always novice.....then I exported the file read in bdm,gave me 2 files ? comparing it with the one read with mpps ? different.....a bit of clarification...

[legendaryslave]

question .....when I go to read the file in the bdm is a different bed in the serial.....example, I read with mpps a bosch edc1634 gave me a 2 mb file....then for safety I have also done in the bdm.....I have to say that they are always novice.....then I exported the file read in bdm,gave me 2 files ? comparing it with the one read with mpps ? different.....a bit of clarification... bdm-mpps.rar

with the bdm do a complete reading of the whole of the flasks maps more operations for the processor and qualtaltro while if you make a reading from the serial read only the area of the map that you are interested, if you compare the files area maps must be equal,
I hope that help

[max75]

reading in serial with mpps read the flash eprom ..right..while exporting the file read in bdm where am I going to find the same.....I don't know if I spegato well...