bmw120d 177cv kit performance edc17

[simone82]

for the price I paid for the kit ? as if l had given

[blackwolf76]

for the price I paid for the kit ? as if l had given

Of course, the thing was addressed in an ironic way...

For? you know the com'?, I do not trust a lot of the dealerships...

[davidemx]

Hello, I work determined mostly on Bmw, dde performance of the 177cv I can tell you this:
edc17 cp02
number Hardware: 8512592 while the hw of the 177cv ? 8512498
number software, or if you want to use the terminology BMW zb nummer: 8516787 of which there are 21 variants depending on the type gearbox, traction, and class of pollutants.
Being the owner of a 320d 177cv I tried to put the file of the performance in my dde using winkfp (bmw software), but me ? been impossible why? the number of hardware of the two units ? different, and cos? in order not to have problems I bought the kit in germany.
In my response, I pose a question , ? possible to further improve the map performance without compromising reliability?? theoretically incremeto further you could have? I apologize since now for my questions from a newbie in the industry.
Best Regards, David.

[simone82]

hello,David,the file I published the antituning,I was able to read it, edit it but failed to write it,then I had to do the whole procedure in bootmode and rewrite after change in bootmode l internal flash

[davidemx]

Hello, nice to see the forum ? active since they are very curious and eager to learn, can you tell me with which musical instrument you read? and explain in simple words what it means to work in boot mode and internalflash, given that there are terms that I often hear on the ecu of the latest generation.
Best Regards, David.

[simone82]

there are two of us wanting to learn,also I am a novice can you? say,I've read with the new galletto clone,having l antituning I could read it in serial, but not write it, or better, once written, would not start,would only be shared if I had rewritten the golds that I have read,and I had her in bootmode,to do this procedure, you must remove the ecu, open it up and insaldare a wire inside the etc,but on the forum you will find the pdf of how to be done? bullshit once that's done you do it always

[davidemx]

Ok, thanks for the answers about the, will try? with calm in the forum to at least see how you f? , you can't improve what has been done by bmw in terms of performance? sorry for the trivial question for you on the forum, but not to me, to read and write in the serial does not mean via obd true, and once that is written, and the car wouldn't start that failures were present in the ecu?
Best Regards, David.

[simone82]

look, I honestly do not believe that bdm can be done,no error,in the framework was the car on the bridge,anyway, with only a 5% press turbo 7% of injection and 2% press rail and I have heard a lot of the difference,not bad

[davidemx]

Thanks for the explanation, st? visioando now the manual by the Wingnut on how to solder the wires to the boot mode, the second you ? impossible and risky that you can do, since my experience says no, put the file, for example your performance in a dde of the 177cv?
Greetings David.

[simone82]

but watch ? a good question I would be curious too but I don't think that is possible,sorry but you don't have already? the control unit of the performance kits?