Failure of ABS, ASR, EBD Alfa Romeo 147 1.9 Jtd 16v 140 HP

[Ivyxeddu83]

hello munro the machine ? been checked several times, apparently the problem ? electric. listen to case do you know any program to do a self-diagnosis fast just to understand what to depend on these lights? a self-diagnosis here! in practice it was to try the solenoids of the control units. if you check that in this discussion, I also released some of the photos to see the com'? made the ecu

[munro]

if you want a diagnosis to be interfaced to a pc to do it all yourself on the forum c'? they are different also in the sale at a good price with the warranty and the support of our admin....I strongly recommend that you contact them to get all the clarifications that you want on because they are people which I think is very very smart...they will be able to advise you better and guide you in the choice to you the most congenial of a given product....

[Ivyxeddu83]

hi guys sorry if these days are gone, but unfortunately there were some problems on the line of the house.
I finally got the cables ELM327 and the KKL Switch changed, and given that, unfortunately, I didn't have internet in the meantime I did the diagnostics on the machine.
Attached are some photos pertaining to the diagnosis, and I would like to know if someone of you can explain in a few words? happened, given that the errors are written indelibly on...

[blackwolf76]

Are the solenoids in the abs pump that does not respond to the controller, then you have to reciprocate it or fix it.

[Ivyxeddu83]

hello blackwolf76
Do you know of a way to fix it? On *********** I have seen that you can? run a test on each solenoid individually, if this generates a magnetism as each solenoid and attracts the metal, good or bad, can you? go back to the contacts on the card and understand where? the defect! what do you think?

[blackwolf76]

as I said, you can verify how you like, but ? objectively inappropriate to intervene in the pump. Even if you find the solenoid in question how do you replace it?? Then you have the spare?? Maybe ? some contact, but I think it's very easy to locate.

Anyway, with a decent diagnosis allows you to verify individually the solenoids... but according to me you will lose time. Being a 0auto abbastanmza the town should look for a good used, perhaps with 100/150 euros are used.

[Ivyxeddu83]

the Problem is not ? the money... unfortunately I can't find the code of the control unit 0 265 900 051. the casino is all here! I know that mount the control unit with system bosch abs 5.7 asr/tc,
but this ? compatible with other that have the same system but have a different code?

[munro]

are not compatible.....or better would be if you could change the can communication of the new ecu abs-asr-tc in the body computer....at least I think....and then for the avoidance of doubt the best mount ecu with a code recognized by the system....