Opinion map A3 140cv bkd

[Gianpy80]

search and find for you the reference, and the second message http://www.professionalchiptuning.ne...po-bosch-edc16
just select from the beginning to the end of the cake and crush on m lowercase, and the map is clear and so is excluded.

you're right, mea culpa.. in my topic I put the last map I made with the exclusion EGR.. if you have oglia I throw an eye?
However, a part of all I wanted to really compliment for the forum.. thank you st? learning a lot of things..
Thanks to all of you.. you are great

[rsteam]

I join myself to the congratulations to the forum..
Going back to the egr, now what do you think?

[Gianpy80]

the EGR should be ok, but spettiamo someone more? expert confirming to safety...
However, if you want my advice, before you load the map fix those obrobri that have been made previously....
If you look in my topic I made a map with the same sw code and I deleted the EGR, if you want to take her, but before loading it lowers the percentage of limiters smoke (iniez. prov.) why? I put more? high because of the turbo more? big one that we mounted on the machine...

[rsteam]

Thanks Gianpy, but I can't download it yet!
For curiosity? which turbo do you have fitted?

[msport (exil77grande)]

so not good,in both seconds panettone you need to leave a bit after,take as a reference these addresses of the first cake,you have to start out by selecting from 18B856 to 18B87C.

[Gianpy80]

Thanks Gianpy, but I can't download it yet!
For curiosity? which turbo do you have fitted?

we have assembled a hybrid, slightly more? large bearings....

[munro]

give us more info on the turbo gianpy....the model,dimensions,capacity....or do you not?

[Gianpy80]

no the problem ? that I don't remember I bought it 2 years ago on a japanese site, does not have a specific name, why? ? a hybrid (always a garrett, but on the discharge side of a model, and the intake of another and then ? been put on the bearings). The specifications I had, but after two years I find more?

[frantik3]

rsteam certainly has done well in the egr but it sure has used some program why? to be touched the panettone as they call them all and not break control, then for all over the map, sincerely, and everything to redo parts from scratch by touching only the quantity? diesel fuel as the ecm calls (injection zoned it seems to me) and then the torque limiters of not more than 780 points, and then enrichment acceleration not more than 23% and then the pressures in the turbo not more than 185 points and its limiters 50 points in the pi? and tienitela cos? if you then want more? play a bit on those increments this written violates our rules, the next time will be an official warning estimated that of those engines you can reach without a lot of steps, and so excessive, but only touching on some of the management out of the map or some limitation out of the map and revenues easily a specific power of 200cv

[rsteam]

Hello frantik, thanks x your contribution!
you say that with the turbine original 185 points can go?