Step By Step the Fiat Bravo 1.9 Mjtd 120Cv

[Chris156]

go quiet.. the only limit is your clutch..if holding go quiet, if you see that slide at low enough to reduce to a few points in time.

[Chris156]

Sati still trying the map???
Let us know something.

[ecuboost]

sorry if I'm gone, but I had problems with the ADSL connection, anyway the map I tried it, but it goes very slow, almost ori..***** and why is that?

[Chris156]

it seems to me impossible that go very slow.. sure you uploaded the right file? as soon as I return home in the control file.

[ecuboost]

I double checked I put the right one, so I put the first proof that you had posted, but I notice that every gear change, especially among first, second, and third, by beating on the joints, I have to lower a bit the lim torque?

[Chris156]

the only thing that you have to lower the time.. but if you lower it too much you have to delete the mod to the advance..

[ecuboost]

the only thing that you have to lower the time.. but if you lower it too much you have to delete the mod to the advance..

if them down with a 2% can I fix this? without changing the advances?
can you explain to me how they work qst maps?

[Chris156]

lower 2% of the time and lowers the advances to 1st grade..

[ecuboost]

here is just qst I wanted to ask you, how do I calculate the degrees? how do I lower it to a degree?for if you had facts to a degree, and 4?

[Chris156]

I know of you.. 1,4 ?.. if you want to edit it, and put it..so I give him a look..