Sorry for that!
The reason was not my intension to pollute the message.
Sorry for that!
The reason was not my intension to pollute the message.
Then, the x-axis are the speed, the y-axis ? the quantity of diesel fuel, known as "IQ" that should be in mm3 (I'm not sure, in my ? so'),
The Z axis (what you read in the table, or the value that you see in 2D ? the turbo pressure is expressed in millibars.
To get the real pressure, you have to subtract the value of the atmospheric pressure.
..but what kind of map are you talking about.?than 2d, as you posted,if on an axis c and the pressure,on the other if toglio le riche signaling is a number from 0 to 160 about..and what I don't understand what it is..the diesel fuel on which the show?ign trip?Originally Written by lupak
I was talking about the map of your turbo pressure;if you see it in 2d, the first of the map turbo there are 2 ramps and are the axes x and Y.
and all the values of the ramp are the so-called break point.
Let the description of the ECM that are all rpm and load.
...if only there was a guide on how to interpret the maps in 2D it would be a bit more? easy.. How do I read the values of the different break point..? You have a screen for me to understand?thanks in advance..
I am attaching an image with the map turbo before where I have highlighted the axes.
If you hover the mouse cursor over the ramps see the individual break.
First tell him the axes c'? usually a higher value that ? the signature byte( which indicates according to the sofrware what he refers to, are not all the same) then c'? a number that tells you the length of the map.
If you can be more easy to read this discussion and that is explained very well:
http://www.professionalchiptuning.ne...cipianti/page4
Write permission
Quote