¿Emulates pretensioners Citroen Xsara 2001?

[afortunao]

Well, I'm going to do my first question. To emulate an airbag, I use the resistances of 2-5 ohms (to detect defective airbag) ... the other day, I had a Citroen Xsara 2001, with failures pretensioners, I wanted to emulate with the resistance and could not? does anyone know what the resistance should be put to emulate pretensioners in this type of machine?

At the end I could solve it with lessia, doing a tele-loading and deletion of belt tensioners. But I have this doubt that I would like to resolve. greetings

[magi1984]

usually you use the 2.2 ohm 1/4 watt
you possibly can try with 5.5 ohms or 9.5 ohms always 1/4 of a watt

[fuorigiri]

I do x of the tests use a lamp 12v 5w 90% of the time it works

[magi1984]

and what things can be used to simulate with a pilot light? The strengths you bring to simulate the component, in this case, the belt tensioner

[giarras]

well the ones described by the magi :
2.2 ohm 1/4 watt.

[afortunao]

I suppose that could work for the light bulb, the resistance ? low and 5 watts, never try.

Perhaps it should? try it with 1/4 watt as I have already? said.

Thanks to all

[fuorigiri]

the lamp 5w to a resistance that often, and compatible with what the ecu reads x understand that the circuit works

[angelo]

I sometimes have fixed it with a trimmer to a small value so as to vary the resistance.

[afortunao]

the solution ? was made by lessia program, set the unit? airbag control, seatbelt pretensioners and cancelled (I didn't know that you can do)

Greetings and thanks