mpps and the lancia musa 1300mj

[zioweb]

not reading

I do not agree, I read a 1.3 mjet with chip spansion correctly. the problem I had in writing.
possibly the file not read ? correct.

[msport (exil77grande)]

I do not agree, I read a 1.3 mjet with chip spansion correctly. the problem I had in writing.
possibly the file not read ? correct.

exact law, but writes the spansion then the read file was corrupted.

[tronic]

zioweb you can post the file to the bed of the spansion I sambra a bit strange, might not have read anything at least I think correct me if I'm wrong

[zioweb]

zioweb you can post the file to the bed of the spansion I sambra a bit strange, might not have read anything at least I think correct me if I'm wrong

Tomorrow I'll post it. It was also consistent, with the maps and everything.

[abberello]

so if y momo 1.3 mjet 105 hp to have the original map should I do only read the data... why? I tried with read all and me ? released a file of 400 kb!!! But basically that diggerenza passes between a read everything and read only data?

[munro]

you should ensure that the chip mounts..? a spansion will not read it with mpps but only in bdm or equipment official type kessv2...
to write it instead mpps writes it to work, cutting the file to 1mb...

[sportknight]

guys,I write qu? why? ? always a the 1.3 multijet but ? an opel meriva
the control unit must be must a marelli or it may also be bosch?
in both cases, there are problems in reading and writing?
I have the mpps v5 so I don't know if compared to the v12 is missing the protocols

[nuovaecu]

happened to me and that hangs in writing maybe lucky and try again to write and rewrite perfectly mpps me not to ever given me problems

[Ross]

1.3 mjet not exist bosch

[admin]

1.3 mjet not exist bosch

The latest models 1.3 mj are edc17