hi all, an old friend to me moddato the file ori to remove both the FAP that the EGR of my sixteen 1.9 Mjet 8V 120 BHP
since you trust ? well....
someone I can check what has he done?
place the 2 files
hi all, an old friend to me moddato the file ori to remove both the FAP that the EGR of my sixteen 1.9 Mjet 8V 120 BHP
since you trust ? well....
someone I can check what has he done?
place the 2 files
Paul
Fiat 16 1.9 mJet 8V 120 BHP bosch EDC16C39
I can't see the files,but on this ecu with regards to the dpf and all the programs work well then for sure ? removed,for the egr I can not tell you not seeing the file
the file ? been done with the time, you should not have any problem even if you are not completely agree on how you ? bypassed the egr.
with a diagnosis you will see how ****llo clogging of the fap 1000%, however, it will not affect the operation of the car
[COLOR="#0000FF"][CENTER][B]In life you never stop learning![/B][/CENTER][/COLOR]
[CENTER][COLOR="#FF0000"][B]I do Not answer to private messages with requests for help! If you need a hand, ASK ON the FORUM!!![/B][/COLOR][/CENTER]
OK, thanks magi1984...
I have gi? removed the fap moddando the file ori with ecusafe.
the car goes well, the diagnosis also (% clogging at 0%).
I would now like to remove the egr... if it was the file with carsoftware?
Paul
Fiat 16 1.9 mJet 8V 120 BHP bosch EDC16C39
try it, then post the file that I'll tell you if carsoftware has successfully removed the egr or not
[COLOR="#0000FF"][CENTER][B]In life you never stop learning![/B][/CENTER][/COLOR]
[CENTER][COLOR="#FF0000"][B]I do Not answer to private messages with requests for help! If you need a hand, ASK ON the FORUM!!![/B][/COLOR][/CENTER]
I attach 2 files processed with carsoftware:
in both cases, the source file was a file ori gi? worked out with ecusafe to remove DPF
F16_pagatti_19MJET120CV 992_665_NOEGR-EDC16C+sol54.bin I've set carsofware to-use solution, 54 (ECU EDC16C39+) and
F16_pagatti_19MJET120CV 992_665_NOEGR-EDC16Csol45.bin where I used the solution 45 (ECU EDC16C39 - 1900 cc)
I do not know why? carsofware face this differences, they told me that my ecu ? EDC16C+39
Paul
Fiat 16 1.9 mJet 8V 120 BHP bosch EDC16C39
I don't even know what to change, the files are identical to the 100%
however the egr ? closed correctly now
[COLOR="#0000FF"][CENTER][B]In life you never stop learning![/B][/CENTER][/COLOR]
[CENTER][COLOR="#FF0000"][B]I do Not answer to private messages with requests for help! If you need a hand, ASK ON the FORUM!!![/B][/COLOR][/CENTER]
are an idiot, that they were identical, I could see it also I ...
thanks a lot, one last thing.
if moddo the ecu with one of these files, physically, what should I do: plug the egr or not? the disconnect electrically or no?
according to me I don't have to do anything, why? should make closed from the SW, but 2 opinions are better than one...
Paul
Fiat 16 1.9 mJet 8V 120 BHP bosch EDC16C39
you can flangiarla to avoid further congestion, but do not disconnect it electrically.
but I would say leave things as they are physically to the fap, of course, or empty, or holes, or meti a straight tube.
[IMG]http://bannerbreak*****/banners/3/563/135700419269659378.gif[/IMG]