solder the siemens ? a suicide
solder the siemens ? a suicide
other solutions?
these mentioned by the other colleagues are excellent solutions.Originally Written by maku1977
the sheet of polystyrene to keep it stationary ? a good idea
mostly I meant to keep it in the "template" the needles....
I used the supplied adapters to the rooster, and I would say that the result is very satisfactory.
IMG_20160714_154958.jpg
IMG_20160714_155004.jpg
IMG_20160714_155011.jpg
IMG_20160714_155032.jpg
good evening to all. exil77 I apologize if I'm reviving this post but I wanted to know if anyone has the diagrams of how you weld the tips in spring vistoo that a few days ago I got the ktag and the template and I wanted to start moving some step
for the moment, thank you
I don't understand that diagram you need, you have to solder the needles on the board New or solder the tab of the ECU?
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
hello cinqueturbo I have to solder the needles on the ticket pero I don't know where they go, and then the e xxx that I got without the use of needles, but the weld has a hole in one of the four corners, and a point of reference?
I am puzzled..
even now I understand that stupid you need to solder the needles in e xxx..
see if this you and useful to boo..
66390d1307403053bdm100b.jpg
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
Write permission
Quote