Map a4 130hp

[Metropolis]

Hi ragazzuoli I wanted to ask you this very info...then I have a audi a4 for a friend of mine on which I delight in the map...I made the first step very soft and the machine in recovery ? remained almost the same as the original but the extension lengthens well...launch after the 3000giri climb very well I have to tell the truth? before them was dead now ? risen..nothing to say...reading a p? even on other forums it seems that there are many other maps out of the driver of the ecm that if you touch the machine flies, and with very little smoke, not to say almost equal to 0 at least so they say...some of you I can? to elucidate on this thing?

[explode82]

you should give some data in pi? inherent in the ecu,the number of HW and SW, the size of the file, and the model of the ecu,with what you've written hardly makes you can? give a help

[Metropolis]

sure sorry so much guys then Hw:0281011222 Sw:1037370445 the file ? large 512Kb ? the ecu ? a edc15 read and write with mpps heheh

[magi1984]

2 things that apply to everyone, not just you.

1 - If you want an opinion on a map always include ori and mod with the maximum number of data can
2 - do not believe everything in there? they say in the forums, especially in some Italian forums, where you pretend all teachers cercandoti to sell their map, and then actually? they cannot make anything

[dvdtuning]

2 things that apply to everyone, not just you.

1 - If you want an opinion on a map always include ori and mod with the maximum number of data can
2 - do not believe everything in there? they say in the forums, especially in some Italian forums, where you pretend all teachers cercandoti to sell their map, and then actually? they cannot make anything

Quoto the magi...if we don't have ori and mod your machine, we cannot evaluate the quality? the work done on it.
Room for improvement there is for that engine but if I understand correctly, need more? starting at low revs seen that ? almost like the original...too much inspiration available at low rpm stresses only the organs of the clutch, if they are original..

[Metropolis]

Thank you very much for the responses... here are the two files..the original and moddati...we would like a change that best in the bottom of the delivery...? really died down, I have to say that this map does not ? all my bag of flour I helped a friend get it and thank him very much for his help, I would like to? begin to understand how to do I..as for the maps out of the driver ecm I downloaded a p? maps from the web on this machine and I've noticed people who have really touched the curves out of the driver, I am the pi? what else is curious to be able to understand that the type of curves can be off driver to improve the delivery and as they say that there is a little smoke....Thanks a lot

[msport (exil77grande)]

hello,so as you have already pointed out when you ask for information or advice if you do not email the file ori and mod appointed as it should and with the most info possible becomes the most boring help and many do not for this,for the rest I can only say that it is modified in a manner too basic and should not be absolutely so it is not correct and could make even a child of increase in % of tot fixed on a map, and in fact you do not have the desired results,the injection phase goes well,the limiters torque to be redone,and died at the bottom because it has been modified only slightly in the high and in the wrong way,the pressure the turbo when I could go,enrichment, acceleration is not and it is different from the similar,the timing of an overboost forgive her ori.

[Metropolis]

Hello msport..thanks a lot for the reply..then I apologize for not having brought immediately to the original files and not modified sar? pi? this this error on my part, that the map was made in a way that p? elementary I don't know...I'm not a guru in the field so I don't allow myself to criticize. Questions:
1)why? torque limiters are not to be so good? I have read many posts of many people on other shores, who said that the limiters made so the STEP went well...I ask you with this info because? I want to learn how to do everything here so I ask you, according to the standard as should be done? then seeing the similar seem to be the same...(see in the table the values..)
2)same question how to move an enrichment in acceleration to be correct? I read that changing it before the 50% and 1500 rpm, the car tends to be accelerated...
3)why? the an overboost do not change ever? I often read that it is recommended to remain original...

Thanks a lot for the explanations

[explode82]

the torque limiters vanna made the steps I've never read around the forum to be honest and so I don't know where you might have read this thing,then if you know how to move the enrichment in acceleration, the car remains accelerated ,and the third time bost can give problems to the turbo and cause breakage if moved in the wrong way,and the people with those maps know what to do and how to move them for me are very few,and even among the gurus,many do not even know comemmuoverle but make the mod standard of the maps or avoid just move them and they are the the majority of people..........this on time of boost ? my personal opinion

[Metropolis]

well, of course everyone has his own opinion ? obvious...I've read I don't remember where, and they said that the torque limiters made in step went on ir? that good....this is the reason of us?....anyway, I compared the torque limiters, and they seem to be made equal in the same way...maybe I don't know see well, or ecm bust me I don't know....I would like to understand how to change the torque limiters and the enrichment in acceleration...I want to learn and do not break always have the boxes to someone...thanks to all