help scodifica or riverginizzare magneti marelli 32miu/4 piaggio group

[tonynet5]

hi to all I would like to return to original state the magneti marelli 32miu/4, or maybe someone I know indicate how to do immo off ???

I would be very grateful if you could give me some indication in more

I thank you in advance

[gimarras]

I am attaching the screen with the values you want to edit. On e2p.

[gimarras]

for immo off putting to FF from = 4000, to = 7220.
after scodifica partial it is necessary to reprogram the keys . immo off is on flash the ecu you can read in the boot loader and disconnect the player

[tonynet5]

thank you so much for letting me answer gimarras, I tried to open your allegao, but unfortunately the page gives me back an error, telling me that I am not authorized to open the file, do you have any other solution to show me the file ????
the solution of the scodifica partial is true of all the miu's mom piaggio ???
forgive me but I am a newbie, I have a software and an interface that allows me to read the codes of the keys to the master, and at the same time also the possibility of riverginizzarla
but the software makes me a distinction of miu in this way

Ecu MIU1 MIU2, MIU 4, which the software allows me to read the flash completes, and also to write it and also read the code of the keys

the solution that you gave me ( FF from = 4000, to = 7220) is true for all three models listed above ???
then I am not sure if immo off I have to do it in flash or in eprom ?

[tonynet5]

I could not edit the above post and I correct myself, I meant the solution that you gave me ( FF from = 4000, to = 7220) you need to make immo off or total,
or only partial ??? if and total to be done in flash as you already have told me, but since I'm not able to look at your attachment and everything is less clear, apparently

thanks a lot I look forward to a response.
thanks a lot have a good evening

[gimarras]

Also I am not an expert. I passed you as I have learned in telling me . The procedure that you have indicated is for the total to be done on the eprom, and then read it, edit the strings as indicated and re-enter. If there are problems on the part of the admin I can send you the jpeg file to your e-mail. Try giving it to me and let's see if the barbs of the ADIMIN beat or less upon us. Then, if you reads us, someone more experienced would be great to make info.

[gimarras]

I try to load the jpeg without zipparlo. Test if you can see them.

[tonynet5]

Also I am not an expert. I passed you as I have learned in telling me . The procedure that you have indicated is for the total to be done on the eprom, and then read it, edit the strings as indicated and re-enter. If there are problems on the part of the admin I can send you the jpeg file to your e-mail. Try giving it to me and let's see if the barbs of the ADIMIN beat or less upon us. Then, if you reads us, someone more experienced would be great to make info.

unfortunately, I can not watch attachments, it says that I lack permission to do this, I also sent a **** to the admin describing the problem already in the past few days, but I still have not received a response.
I leave you my **** maybe the admin will be understanding,or at least ask him to be in this case
tonynet5*************

[tonynet5]

hello gimarras,thank you for the effort in posting the attachments in various formats, but apparently the problem still persists,I already sent a **** in the past few days,and also at this time exposing the problem,but still I don't get an answer, just to try to not exit out of regulation, I ask to the admin to be lenient and to make an exception this one time just for the situation.
in the meantime, I leave you my **** "tonynet5*************"

[tonynet5]

tonynet5chicciola******* then put the point of it