[EDC16C39 145_421] Map Pack "COMMUNITY"

[alex210392]

great job! if you upload the damos original 147 can I work I also, and maybe create a map pack for the alfa mito €5 equipped also with edc16c39 having the original file converted from auto to a friend

[gionag]

It's the classic around for a bit.. I think.
However, you will find in the annex.

If you find a way to be able to download the Vs. file, I would give everything in the first post, so anyone who comes should not scroll through 1000 pages to find all the info.

[gionag]

To be clear... I do not want to make controversy, also why can't I see the file.
Just for this, I'm curious to know what you've added.

With the maps specified in the initial file you able to inject > 100mm3 with the map "informed" (how I hate this term...).

Would you do me a summary of your added ?

Thanks

[alex210392]

It's the classic around for a bit.. I think.
However, you will find in the annex.

If you find a way to be able to download the Vs. file, I would give everything in the first post, so anyone who comes should not scroll through 1000 pages to find all the info.

thanks gionag as soon as I have 2 minutes I also I

[jack91]

Really very useful

[gionag]

Account to post the map pack with some new added.
Today I tested the possibility of "off" the lambda control and the management of pcr simply by using the hysteresis curves recorded...
It is very useful in my opinion to log in with both functions disabled so you can ACTUALLY see what makes the map feedforward of the VNT.
I have always adjusted the geometry variable with the pid entered, and in the light of the log that I did today, I realized how useless/inaccurate as the methodology of work.

Eliminating any auto correction and limitation of the machine is actually seen as it is out and you can work in a extremely more precise and targeted.

That said, I read and I still feel in the lap of the people that call the peaks "an overboost" and that the rule the coefficients in the PID a "taste".
There is nothing of all this. It is not a question of art... but a technical one. The concept of the Peak pressure and the constant pressure is just nonsense.
If you have a peak and a constant means that it has not been set properly the variable geometry.

The board of do this test and see if it is true or not.