Activation Cruise control peugeot 307

[alex210392]

hi all I have a problem with this car engine 1.4 HDI ecu EDC16C39, I placed the lever of the cruise in the housing, through the diagnosis I have given to the bsi in the presence and, in fact, in the quadrant of the km is the c/c, but in ecu engine management it's not giving me another choice in addition to " no speed adjustment with ABS multiplexed" and in fact, does not work, I checked the brake pedal and in fact we missed the signal to send to the ecu, and promptly I entered in the pin E4 in the connector C without any positive result, the signal the clutch is already connected to pin E3 connector C, my question is does anyone of you has found in my same situation and has solved it?
thanks in advance to all

[cinqueturbo]

I have no experience with 307, but mounted on 207 1,6 112cv sid807evo as smooth as oil..

perhaps the 207 has everything wired?...

are you using Lexia?

[alex210392]

I have no experience with 307, but mounted on 207 1,6 112cv sid807evo as smooth as oil..

perhaps the 207 has everything wired?...

are you using Lexia?

Hello cinqueturbo, you use lexia I turned on the fog lights and I wired the original installation by welding is also an external relay on the ecu fuses in the engine compartment (if it can be useful to the forum I have the pictures of the operation) otherwise it does not work, excuse the O. T. returning to us, I noticed on the diagrams on ******** and wow that the ecu picks up the signal position clutch and brake, and by comparing with the car I saw that the ecu came only the signal the clutch and I have wired the signal, brake position, thinking this was the problem but nothing in bsi all ok, it goes to a good end, even the test of the buttons but the ecu is not ec another option in addition to without speed control with abs spin abs multiplexed and esp, then I thought that there is some pin that enables the function by bringing in a positive or simply bringing it to the mass, some how it worked with the old fiat one for the octane if I'm not mistaken

[cinqueturbo]

Well you know what you do fix surely...

if you have a series with the cruise you can verify your assumptions

[alex210392]

Well you know what you do fix surely...

if you have a series with the cruise you can verify your assumptions

a friend of mine has the version "australian" the 1.6 hdi but they are totally different and he like you, without any problems, has enabled the cruise without limiter because, otherwise, had to change the accelerator pedal (known issue for those of you with the everything after).
For the diagrams found on the net about this edc16c3 are lean and are not well-known all the pins but only a few, unfortunately, so my only remains an assumption without basis until we find an equal "running"

[alex210392]

Hello cinqueturbo we have managed, by entering into programming as a vehicle, a citroen C3 and now it works, I did it because both of the vehicles at the time used the same ecu