guys no one......I would just like to know what I'm doing on my car.....
by don't be shy
guys no one......I would just like to know what I'm doing on my car.....
by don't be shy
if you do a dpf off when ever would you use the maps egr are activated DURING THE REGENERATIONS OF the DPF?Originally Written by joker01
^^
ok so the second panettone is for the operation of the egr during the regenerations thanks for the info....
at the moment I have not yet purchased the pipe for the removal of the dpf...around and there are conflicting opinions in the make a map with the egr off with the dpf still fitted.
there are those who say that during regeneration the egr is always closed,but if my 2nd panettone is a hysteresis egr during the regenerations and then the egr works???
here you tell me? I can turn with the map egr off dpf active??
It is quiet, for a few thousand km
I found one string in hexadecimal for the dpf off on my file ori. I tried this as the various guides around: 00 00 01 AD 7F FF 80 00 01
the bit that I brought zero to the address 1D15E0.
no I find another as said cinqueturbo....
mistake to look for or is it ok???
for me, just 1, try not cost anything since this is your car.
possibly you may need to disconnect the probes if you get a U0301
Hi thanks a lot of help first of all....
Should I take a hose with the fittings for all of the probes and then they would all connect could give me the same error??
try leaving, if he leaves the disconnect, it is obvious that if the tube has the holes you need to leave screwed :P
you know, because it could give the error? the probes have to be out of scale or other??
if you need to electrically disconnect must disconnect all 3, and from where??I ask because I'm doing all the work by myself and I don't have a bridge available,I would not stay screwed and not being able to get to where they are connected to the probes......
but the bit that would be bytes) you brought to 0 with the display to 16-bit?
Quote
