Opinion map Point 1.3 Mjet 90cv mjd6f3hw04p 3641pm91

[salvatoreragonese]

Hello, first of all, I want to thank you for the interest and for the help, really thanks!

But the limiters team so high, and even at high revs? The Turbo limit turbo and an overboost orig? Certainly me, I will study carefully and maybe I'll try making a log. Have you tested?

Good morning Simone, but which I do with pleasure. In my lap so the 1.3 are all identical. For the turbo you see I do not know the status, and then not the I touched .finish the map by “inserting “ the turbo with its limiter does not go beyond the 150/180 millibars. Conversion factor *14.1-1000=millibar and then from there play with the times but already so it should go let me know

[simonemora]

Thanks a lot!
The finiró and you aggiorneró of course....
Really thanks a lot!!!

[simonemora]

Good morning Simone, but which I do with pleasure. In my lap so the 1.3 are all identical. For the turbo you see I do not know the status, and then not the I touched .finish the map by “inserting “ the turbo with its limiter does not go beyond the 150/180 millibars. Conversion factor *14.1-1000=millibar and then from there play with the times but already so it should go let me know

Here she is, I hope I have done the calculations well.....with the turbo I have raised too

[simonemora]

I correct myself, here is the mod finished today!

[simonemora]

You can close the discussion please? For me it's okay....Thanks

[bob125]

Hi to all, I would like to post the map of my grande punto 90 hp,is a map made by a tuner in my area, which I'm not very satisfied:
seghettamento in the fifth and sixth between 1800-2200 rpm
when accelleroho a sharp pressure drop in the turbo at about 2300-2400 rpm..then you continue..ori remapped .rar

[bob125]

if someone can give it a look and give me some advice..thanks

[lsdlsd88]

0.4 bar of turbo pressure?? sheer madness.

I hope for you not to reach them. later you can post an example if you want to try it.

[lsdlsd88]

seh goodnight, I as the place to hear some opinion but you have a few mex and can't download it

[bob125]

Already, for now, I can't..pity.
I know that I have to edit it alone, and from what I understand, first of all, I have to lower the turbo!!
Could you kindly confirm that the turbo pressure is that the ecm the appointment as a pressure limiter #1#1? are 2 maps, the first would be the peak pressure and the second pressure is constant, right?