Page 2 of 4 PrimaBefore 1234 LastUltima
Results 11 to 20 of 36
  1. #11
    THE AVERAGE USER
    Date Of Registration
    Jun 2017
    The resort
    genoa
    Messages
    152
    have you then solved it?

  2. #12
    THE AVERAGE USER
    Date Of Registration
    May 2017
    Messages
    336
    No, I loaded a map that goes well , speed I have tried up to 210 Km/h but I always have a problem beating the injectors and moderate to low. If you increase smoke like a locomotive but does not push as it should. The control unit indecipherable without the drivers it takes an hour just to scroll through the maps.

  3. #13
    THE AVERAGE USER
    Date Of Registration
    Jun 2017
    The resort
    genoa
    Messages
    152
    well my stops at 199 then t is already better ( which the tool uses to write?)

  4. #14
    THE AVERAGE USER
    Date Of Registration
    May 2017
    Messages
    336
    KESS Clone with the module tricore which I unlocked the antituning. Then use in Genius DIMSPORT original for other jobs.

  5. #15
    THE AVERAGE USER
    Date Of Registration
    Jun 2017
    The resort
    genoa
    Messages
    152
    But a file that is read with the newgenius is smaller in size comparison to a bed with a rooster, or another tool?! The possibility exists to write a file of the newgenius with the rooster by changing something?

  6. #16
    THE AVERAGE USER
    Date Of Registration
    May 2017
    Messages
    336
    Yes , with minor dimensions, the file of the beetle from two mega becomes 118 kb. Of course I speak of the version SLAVE, and then encrypted and unreadable with tools like precisely KESS and GALLETTO Master. Technically decriptandolo you could rewrite it as with any tool, but in practice it is very difficult to decrypt.

  7. #17
    THE AVERAGE USER
    Date Of Registration
    Jun 2017
    The resort
    genoa
    Messages
    152
    ok so if I can't find the original file after the update are stopped saw that on my son's been changed too many values and no one takes the trouble (and rightly so ) to bring everything back into origin and then change it back

  8. #18
    THE AVERAGE USER
    Date Of Registration
    May 2017
    Messages
    336
    Give me ECU data and the machine I see if I can find the GOLD. You have compared to mine?

  9. #19
    THE AVERAGE USER
    Date Of Registration
    Jun 2017
    The resort
    genoa
    Messages
    152

    Question

    it is l I compared but there are several points of difference directly with the ori ,
    I have put the original file osg416 read with newgenius and the one that I read with the rooster while the jpg is done with the vag and I have the comparison between the original and the last map and as you can see at the bottom there are a variety of corners that should not be there
    Immagini Allegate Attached Images
    File Allegati File Attachments

  10. #20
    THE AVERAGE USER
    Date Of Registration
    Jun 2017
    The resort
    genoa
    Messages
    152
    sorry I read now that you asked me the ecu model 03L906023AB 9979 engine cay

Page 2 of 4 PrimaBefore 1234 LastUltima

Tags for This Discussion

Write permission

  • You you can not post new threads
  • You you can not send answers
  • You you can not send attachments
  • You you can not edit your posts
  •