Five no one wants to accuse anyone, but you know that one that reads 180 hp at 3000 rpm, with a 1,3 mjet, he says, and that is there air? however, if you said that the couple had not been increased the way one asks the couple no capacity manco and sti hp do they come out? that's all...Originally Written by cinqueturbo
Put it this way.
If you believe that a guy of 27 years says *********, we can finish the discussion here.
Let's go with order.
The software, is not a tour, but a tour virtual. Captures rightly the data, to be able to calculate, in function of gear ratios included, coefficients, weight and more, the power.
Let's admit it all. Have you tried uphill, and downhill, and never in the plains. ( so I see in the comparison between the two graphs)
About the values I have two things to point out.
1)you said to Me that I didn't know to read a chart, and you said to me that he had the max power at 3000 rpm.
2)you're telling Me that has maximum power at 5500 rpm and max torque at 3500.
Admittedly, I do not know how to read the chart, having any chart in front of a 1.3, if you find maximum power at 3000, you know that is impossible... So before you tell me to learn to read a chart, be careful what you write.
Also, I get to say what I said. Explain to me xke with a 14, make power than a turbo much bigger?
I didn't want to kill the discussion....
xD
hello danny. Sorry for the delay if ricito this response... overdueEh, if you take Na panda 4x4 is doing the same thing (from which comes the file golds that she used).
Ok reason is simple, if you know it
With the file ori of the panda 4x4 which is the launch already. You could cancel it ? To know the area.. the map, as you say,
Where to act x who knows. Thanks.
not to make the egg....but according to me they are a bit too manyI think they are about 150 the royal tour down. Otherwise with a 1549 or gtd1449 what would you be able to pull out with fuel injection stock?
Henry, 1549 , cp1k3 stock, you will make 200 hp, on the basis of mjt1
with the injectors stock? with how much pressure? I see it very hard....then the cp1k3 is not the one that mounts the 75 hp? which, moreover, holds the pressure of the cp1h3...
2.5 bar fixed, cp1k3 R55..... You do!!!
so according to your reasoning I with the gtd1449 that runs at 3 bar injectors and stock cp1h3 stock I make more than 200 hp?2.5 bar fixed, cp1k3 R55..... You do!!!
Enrico, I did 194cv with cp1k3 stock R55, nozzle and 1549.over 200 1549 and cp1h3 and inj stock, but on the basis of mjt 2.
Write permission
Quote