Citazione Originally Written by cinqueturbo Visualizza Messaggio
From what you wrote it seems that you also have the file Ori right?
Not the same mica to your description that you've given to this file..
Rail pressure I percentage by 1-3%.. 1390 Bar, Limiter, such as from the mother house at 1350? do not go to failure?
Injection times are at the party too soon, 900 rpm, always in the proportion of 2-5%
The map of pedal 6 are present in this file not the toccata no
Torque limiters party with rise too soon 1000 rpm, but maximum torque at 2000 rpm with discord in the increments between the map refines
(380 nm to 1200) I don't know where you saw them and how you have calculated.. those rides I see 6042 that should be mg diesel.. now I have no idea of the nm computes the ecu for that fuel,,
Beyond that there are no other lim diesel etc as the limiter fumes..
Pressure the Original Turbo as house mother to 1.2
Swirl?? but the mount??
meanwhile, I thank you for your exhaustive answer

I do not own the ori. I have gone very much to the intuition, however, because I have the car for 10 years and I think I know it pretty well. mount the swirl.
6 maps the pedal? :O I have only found 4 with the ecm, but actually winols I had find 6, only that they were very divided between them and I couldn't understand them.
for the torque limiter, I was almost certain that it was done by dogs....*****!
For the offset of prail as you found it? I based on what you wrote I got the most great and there was a map, and divided by 10, and I arrived to 1390 as written by you, is a line of reasoning correct this? Also I found two maps of the rail, what changes between one and the other? or better, how do they work?
I also found the limiter of the rail. ***** if you were right!! xD luckily, has never gone into recovery
the other thing I didn't understand it for nothing: now I don't have any idea of how many mm3 inject the ecu, and if it is informed or deceived, but given that I want to inform you, and to inject 70 mm3 (random number) which map should I change? and how can I inform the ecu?

thanks a lot cinqueturbo