remapped punto jtd 1.9 file 955-392 EC 15

[vince59]

Hello all,

I think I already submitted, but I've done a bit of confusion between the various forums.
Are struggling with the remapping of the "old" punto 1.9 jtd 80 hp with which I would like to start aentrare in the world of tuning. Are practical diagnosis and anything else on the fiat and bmw...the car home, but never tried the tuning.
The point is the donor for this.
From what I read is a motor that is suitable to be remodeled, I speak dipoco to get to the limits meccnici and I do piùper imarare that for another. I remedied the software and are waiting for hardware (the stuff in chinese).
I downloaded the file ori and I'm looking into, but not nasconod that still are not able to intervene.
I would be grateful if you could let me have a modified file such that it can be studied and compared with the original and possibly "fired" in the ecu to see ...the effect. Grateful to anyone who wants me to help. I repeat a tuning sustainable by the old woman, without excesses.
Thanks

[frenk85]

Hello vince59!also wanting to make a map you do not have privileges to download from the forum.
So the only thing you can do is ask for help and understand the different maps that you have on the screen.I,like many others,we are at your disposal!

[vince59]

Thanks, I adapt myself to the rules delforum but sometimes some rules just do not understand...okay. I conversant on the operation of the engine and on the logic of combustion and aware of the danger of the advance on diesel engines.
That said, I seem to understand that to map this model should intervene only in some parts/areas (for example, turbo pressure and quantitò diesel)... in the event that they are these are the areas I would like to understand how to arrive at indentificarle in the map and as far as I can incrmentare. It also seems to me to have understood that with titanium drivers to help identify the areas....it is correct what has been said above?

[vince59]

...I'm browsing through the map found on the network and the original one...with titanium...I've seen that the program allows you to load both files and compare incon optimize in 2D. I see that the map touched up was touched a little everywhere in the beginning and in the limiters and instead left the original in the turbo. All of the areas touched-up seem to make sense to my eyes except the area phase injection (map 1/1) from "serrated" has become a flat line across the entire RPM/load, or the value is 12000 everywhere. What does that mean?

[frenk85]

These rules are there to avoid

[frenk85]

King for someone to do the mischievous,enter you ago i ca**her and disappears!!! Then..............
Returning to ecu titanium not really correct to call the map,in fact, the injection phase call from the sw that is not the egr,which is set to that value,remains closed.for the advances in ecm are "outside the map" that is, there is the call how the various limiters both turbo iq. this ecu is dated and simple,if you don't want to overdo it, just play with the lim-torque pedal is to adjust the times

[franco75]

...I'm browsing through the map found on the network and the original one...with titanium...I've seen that the program allows you to load both files and compare incon optimize in 2D. I see that the map touched up was touched a little everywhere in the beginning and in the limiters and instead left the original in the turbo. All of the areas touched-up seem to make sense to my eyes except the area phase injection (map 1/1) from "serrated" has become a flat line across the entire RPM/load, or the value is 12000 everywhere. What does that mean?

This map surely is the management of the EGR in edc15 you close so.
If you study and start to work with it also by just changing some maps and the places you will see that you will find help.
You should start by maps the pedal and the torque limiters,

[vince59]

...some indication on how to work with it.....where and how...thanks

[franco75]

Mail the file that I try to help you and aspiegarti as you have to act, so you can practice with the ECM.
You will see that also other members will help

[munro]

I follow you