Page 1 of 2 12 LastUltima
Results 1 to 10 of 11

Discussion: the glow plugs golf 5

  1. #1
    THE AVERAGE USER
    Date Of Registration
    Oct 2016
    Messages
    123

    the glow plugs golf 5

    the guys on the golf 5 1.9 2006 port in the diagnosis of three of the glow plugs burned but the glow plugs are ok not to get the current or better comes intoprno the 2 volts from what can depend on someone, and already happened to you?

  2. #2
    THE AVERAGE USER L'avatar di mecdoc
    Date Of Registration
    Sep 2012
    Messages
    250
    Check the module under the battery

  3. #3
    THE ACTIVE USER L'avatar di munro
    Date Of Registration
    Oct 2012
    The resort
    EARTH
    Messages
    1,207
    Also check the relays related to the glow plugs if I remember correctly, should be marked with the number 100..
    On some golf the 5 series however I had to replace the cablagetto of the glow plugs..
    The vw provides and not the coast, not so..

  4. #4
    THE AVERAGE USER
    Date Of Registration
    Oct 2016
    Messages
    123
    The relay in the compartment fuses with the number 100 l I have seen but the module under the battery there is can you be more precise ?
    In any case, there are 2,8 volts then the wiring should work

  5. #5
    THE AVERAGE USER (FO)
    Date Of Registration
    Jan 2013
    Messages
    483
    firing a stupid, is not that the module sends a low voltage to check that the glow plugs are all in place (2,8 volt)? and raises only if you find everything ok on the glow plugs?

  6. #6
    THE ACTIVE USER L'avatar di ugoboss
    Date Of Registration
    Sep 2013
    The resort
    FRARA
    Messages
    1,825
    also happened to me having to change the wiring.
    ugo ---- president A.E.P.

  7. #7
    THE AVERAGE USER
    Date Of Registration
    Oct 2016
    Messages
    123
    I'm not sure that it is the wiring in my case, because the voltage of 2 volts is there then the wiring is intact otherwise I would have 0 volts (correct me if I say silly) for the first ignition of the picture for a few seconds, I can get 12 volts (a few seconds, I mean 1 or 2)

  8. #8
    THE AVERAGE USER
    Date Of Registration
    Sep 2016
    Messages
    106
    If the glow plugs are ok check the connector on the ecu and measure the voltage directly from the li, the problem may be them

  9. #9
    THE AVERAGE USER
    Date Of Registration
    Jan 2014
    The resort
    Nocera Superiore
    Messages
    191
    the problem is the module of the glow plugs it is a little black box where the wires coming to the glow plugs

  10. #10
    THE AVERAGE USER
    Date Of Registration
    Oct 2016
    Messages
    123
    the glow plugs are new the wires of the glow plugs, they come in a plug the round inserted in the cylinder head I found the relay but should I replace it to test that the module of the glow plugs but I cannot find it I do not, it is reported even in ********

Page 1 of 2 12 LastUltima

Tags for This Discussion

Write permission

  • You you can not post new threads
  • You you can not send answers
  • You you can not send attachments
  • You you can not edit your posts
  •