edit limiter, smoke - threshold lambda alfa 159 1.9 150cv 16v

[maxgen]

You argue in a way all your own..

if you have a problem on the car why not the systems, instead of sneaking around that you lose time?

and known to already have issues with the clutch etc, and how to make a map on a engine time..

the pane to the file..
studio, logic and patience quid, we can already discard?

open the file and scroll through the mod, before you find the "required torque blablabla" will have something not right?
perhaps starting modare already 400RPM increments of 21%?
Correction Diesel 1C1F86 ditto with increments exaggerated, turbo as from 150p idem on this map
1CBA82 put ori
1CBCF8 put ori the BP system and the lim with policy 410RPM?
1CE5B0 system the lim. with policy to 0RPM then one already from 91,54 of increase?
"1816,7"can never be correct that request? Midnight
1D061E-1D112C put ori
1DC0E0 too soon
1DF642 put ori the fix possibly after a trip
1DFB0A idem
1E0EE6 too soon I would stop to 2500mbar calculates you
1E1370 idem
1E3164-1E3304 Booo
1E682A I don't think I need to tell you now what to do no? I advise you to not go over 1650
1E6362 copy increments from the one above
1E682A copy increments from the one above
1E6BC6-1E6D30 use the head and by 50-100 in most of the pressure previously required
make a file that let's look at it another is as

Actually, many points I've not understood... I'll be inexperienced but you can be more precise and clear? Of course, many thanks that thou hast lost and spent quality time with my map

[munro]

Well, obvious, but if you have a pedal that, for example, requires 550nm-100mm3 at 1750 laps, but those laps in the various limiters you are firm to 50mm3(always numbers) to the clutch there is no problem..

[tranky]

Boys to edit a mod on edc16, which has not done the calculations, it does not help..
If the user is not part of the file ori does not see the BP ori and not defines the increases in what are referred to (z-axis), can raise or lower to cazUm any thing, but will never understand what it is doing in relation to what..
Maxgen if they trust you, do those damn step as said above, leave it alone advances, and the times and post something that makes sense.
In the first place, Set the IQ to as much as you want to get to and from them do the rest. If you continue to farneticare changes to that map doesn't come to anything, even a thing.. you Learn the ECM.. Already is something but a few things.. Make a nice excel table, copy the maps, insert new rows in the table and the scale of the BP.
If you accept it is a good advice.. Then obviously you're ****** deciding on the road ahead but the one joke is not the best on these ECU.
Fate vobis

[maxgen]

Boys to edit a mod on edc16, which has not done the calculations, it does not help..
If the user is not part of the file ori does not see the BP ori and not defines the increases in what are referred to (z-axis), can raise or lower to cazUm any thing, but will never understand what it is doing in relation to what..
Maxgen if they trust you, do those damn step as said above, leave it alone advances, and the times and post something that makes sense.
In the first place, Set the IQ to as much as you want to get to and from them do the rest. If you continue to farneticare changes to that map doesn't come to anything, even a thing.. you Learn the ECM.. Already is something but a few things.. Make a nice excel table, copy the maps, insert new rows in the table and the scale of the BP.
If you accept it is a good advice.. Then obviously you're ****** deciding on the road ahead but the one joke is not the best on these ECU.
Fate vobis

Hello, I have not had time to devote myself to the Map. What I would like to ask for starting from scratch, and I hope I do not ask so much, if I posted a base Map where I set up, changed, only the map IQ according to the logic right and then I will from this point start to modify accordingly all the rest.thanks

[tranky]

If you do not learn to read the original file and explain to me what you understand about a modified file?
You have to read the IQ, the bar, mm3, report nm on IQ, afr...
You have a way to go before you reach a BP..
Studies chebsu these ECU there are info in spades in the forum, especially on the 147, 159 and the like..

[maxgen]

If you do not learn to read the original file and explain to me what you understand about a modified file?
You have to read the IQ, the bar, mm3, report nm on IQ, afr...
You have a way to go before you reach a BP..
Studies chebsu these ECU there are info in spades in the forum, especially on the 147, 159 and the like..

I asked just To see your map iq is modified, and from them study on how to adapt everything.. I don't think I have asked nothing exceptional. It is only a courtesy that I ask.

[dragusdrake]

Hello, I have not had time to devote myself to the Map. What I would like to ask for starting from scratch, and I hope I do not ask so much, if I posted a base Map where I set up, changed, only the map IQ according to the logic right and then I will from this point start to modify accordingly all the rest.thanks

what you have assumed to do, the entire map is not that you can only do one thing...the maps are linked to all of them
it is not that there is only one map IQ, there are also limitations, and it is 50% of the work practically, the response of the tranky has not been a response veiled way to say "you can't have the jelly ready"

don't take it, it is as difficult as speech, already thinks that each one follows different logics to make a map, then the advice is to study for your logic, if this is your goal, because if you are from the "already done" however, there you would understand if you do not sbattendoci the head from you

[maxgen]

what you have assumed to do, the entire map is not that you can only do one thing...the maps are linked to all of them
it is not that there is only one map IQ, there are also limitations, and it is 50% of the work practically, the response of the tranky has not been a response veiled way to say "you can't have the jelly ready"

don't take it, it is as difficult as speech, already thinks that each one follows different logics to make a map, then the advice is to study for your logic, if this is your goal, because if you are from the "already done" however, there you would understand if you do not sbattendoci the head from you

I understand it perfectly, but I in fact meant only one Map iq, and from there do all the rest... I do Not ask for 50% of the mapping, we need each other and from the Map ori have only one change as a starting point I don't think jelly ready because if you do not study you will not be able to change with logic, all the rest.

Among other things, I've posted a Map made by a tuner that I paid and I did not imported that others can copy. Then I ask for a Map of departure and tell me that I want the soup ready? ... The spirit of the forum is to help each other... my of course is not a tone of polemic to the contrary.

[dragusdrake]

I understand it perfectly, but I in fact meant only one Map iq, and from there do all the rest... I do Not ask for 50% of the mapping, we need each other and from the Map ori have only one change as a starting point I don't think jelly ready because if you do not study you will not be able to change with logic, all the rest.

Among other things, I've posted a Map made by a tuner that I paid and I did not imported that others can copy. Then I ask for a Map of departure and tell me that I want the soup ready? ... The spirit of the forum is to help each other... my of course is not a tone of polemic to the contrary.

to help you appropriately map IQ requires a map almost finished. There is only one map IQ, there are some

and anyway, I can't help you for the moment because I can not download file

[maxgen]

hello guys...I try to learn more and more...
a question...I have read that by bringing to zero, these 4 maps strives less the turbine when driving the car with the pedal constantly...for example on the motorway.
in practice, the pressure remains low, encouraging the less precisely the turbine.And is it true?