you will need to check and study, the sw if not it tells you which are the maps useful for a change
when you know which maps you need the you can search in damos, or if you are in doubt as to what it is a map you can go to see
anyway search in the forum, sure you will find information on the 147 jtd without the need of damos seen that is quite widespread
thx for help mate
hello I am trying to upload a file .cvs can't....can someone help me
Hi I have read the whole discussion very interesting, I would be interested if anyone has want to share, you understand how after having loaded the file, open its damos, how do you find a particular DTC, and also if this is the area that leads the recovery....
thank you very much
hi I have loaded the map and damos only that the damos does not overlap I from only a the list above and in the bottom I by the maps of potential
as ever?
...it is still valid this post? does not seem to...
Each family of ecu has its own "system" of DTC, is not so simple, unless you have the damos specific to that file, especially to find the area of recovery....I there I have lost nights, but some satisfaction I waived without the software...to explain it is very difficult to have to have the eye and the nose truffleOriginally Written by filoxio
you have to open the file Ori or rifermimento and then import using the ex-import the file A2l and does it all automatically
It is ok but Drive not from anything likely to the sw of the damos and the control unit do not match even if they are of the same family we are talking about a edc15c2
Write permission
Quote