elimination adblue on scania vehicles

[igor]

attention to? why? if ? the state made an update to the cent engine with the vehicle stationary, the parking brake is engaged close? partially the valve of the engine brake to increase the temperature of the cat

[igor]

attention to resistance, I suggest a 2w and I can connect it in parallel and not in series
I hope this information was useful, and then let me know

[igor]

hello alien to the scheme can't find it for? I can tell you how to do it:
disconnect the temperature sensor upstream of the cat, then it creates a link with a resistance of 1250hom between the positive and the negative, and then reattach the sensor after this link.
basically you'd need to add a resistor in parallel to the sensor

[alien78]

thanks a lot......

[riccardo59]

Sorry on the site autoobd you can find the emulator adblue including the mounting scheme, I don't know how it works if the button or not, but I know that work

[riccardo59]

hello guys if anyone interested I on scania 500 I eliminated with an emulator should be perfect and there are no problems

[ringo]

For Scania simple emulator from a few euros with 5 wires Positivo24V Positivo12/24V under the framework 2 can lines and gnd installation 5 minutes, with a fuse, if present apparatus original if you removed the emulator is active. For clarifications please contact me.

[robby51039]

hello,I have deleted ad-blue on a scania r500 with the emulator, performance is ok, but having emptied the catalyst, turns on light engine, resulting in cutting power..***** eerrore sensor and nox, do you have solutions m & e services about this?

[riccardo59]

hello robby51039 unfortunately you have the probe nox the beginning of the muffler and went to work with the emulator, the system must work perfectly, or you find a system to eliminate it, same thing happened to me after about a year error sensor nox replaced the sensor and now everything is ok