I am convinced that you have selected the first family that by the BDM in these cases and that is Alfa Fiat LanciaOriginally Written by Gianpy80
now you're in trouble..
give me a few minutes that you assemblalo a compressed file to write, and try to re-read.. I don't know how it will end, unfortunately, I doubt that he will start..
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
Nothing gives me error on the size of the Eprom..
anyway, load this Compressed file
proofread and mail readings separate
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
Nothing tells me incorrect ecu file or family not enabled
maybe cel, I made it, I wrote the flash is corrupt, only that, and now requires me to nuoivo the family when I start the bdm, so I have rewritten the complete backup that I had read by selecting new bosch ford. so now I have the ecu as at the beginning. Now I have to re-read the backup by selecting it as the family kia/hiunday right?
Nothing tells me incorrect ecu file or family not enabled
you had to read the e2p with the upa or a player of the eeprom and then did all the tests that you wanted to rewrite the whole thing now you're in trouble!!!
What is a hare? A rabbit Abarth
quoto.. especially when the tool does not recognize the ecu at 100%
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
No I selected bosch Ford, I'm sure because I read and re-read several times. Read the eeprom with the upa I thought about it, unfortunately, only after. I didn't think that the original backup did not tell me that would no longer load.
But if the scodifico not a part of it?
Maybe I have a belinata...but if you have the backup of the e2p original, why not try it with an other tool type the Rooster, or ktag to throw it in?
Quote
