Compatibility block Exchange between AlfaRomeo 147 and the Opel Astra

[tranky]

Hi all..
I would like to know if having a change of the original 5-speed a 147 937 120 hp (8valvole) model c530.5 replacing you can fit the 6 speed transmission of the opel astra 1.9 cdti which should be a model CAMU160.
A view would seem to be identical except for the "scoop" the external, but for the rest, I repeat, seems to be identical.
Can you tell me if it fits or not on an Alfa ?
I know that I should mount the c530.6 but it is not of easy availability and having this on hand, I hope it goes well!
Thanks to those who want to help me some.

[cinqueturbo]

Change the pad holding force with the fork and the axle shaft long side one has the flange and the other a thousand teeth inside the differential..

attack media? Boo

[tranky]

Change the pad holding force with the fork and the axle shaft long side one has the flange and the other a thousand teeth inside the differential..

attack media? Boo

Thanks for the reply friend.. To view looks very similar, but comparison sites on these things does not yet exist.
Then what you say means that, not being able to (or you?) change the parts you said, they can't do a caper...

[cinqueturbo]

Thanks for the reply friend.. To view looks very similar, but comparison sites on these things does not yet exist.
Then what you say means that, not being able to (or you?) change the parts you said, they can't do a caper...

I say that you need both the Gears removed to make a comparison fairly accurate, and if you also have the drive shafts and even better..
if I was sure I wrote to you go quiet!!
but no I can't be seen that one has the wheel cylinder hydraulic inside and another outside, in addition to the difference in the engagement of the drive shaft the long, the short one I don't remember to me..

[tranky]

I say that you need both the Gears removed to make a comparison fairly accurate, and if you also have the drive shafts and even better..
if I was sure I wrote to you go quiet!!
but no I can't be seen that one has the wheel cylinder hydraulic inside and another outside, in addition to the difference in the engagement of the drive shaft the long, the short one I don't remember to me..

I was hoping a lot on the "go quiet"
Just do the comparison you update.. Time to prepare the clutch reinf. and I remove everything.. Thanks for the time

[munro]

The m32 and different from the c530 changing the attack of the media in the m32 and above the change in the c530 and support the front and on the LEFT of the car...
And anyway, the m32 and in exchange for the poop that you step always...
If you want to change the resistance for the Alpha go c530 6-speed gearbox in the 156 2.4 M-Jet 20 valves..

[tranky]

The m32 and different from the c530 changing the attack of the media in the m32 and above the change in the c530 and support the front and on the LEFT of the car...
And anyway, the m32 and in exchange for the poop that you step always...
If you want to change the resistance for the Alpha go c530 6-speed gearbox in the 156 2.4 M-Jet 20 valves..

oh I know that the c530.6 is better but now it's free I had arrived at this.. as not mentioned.. it was more of a curiosity, in view of the similarity of aesthetic.
Thanks