Results 1 to 7 of 7

View Hybrid

  1. #1
    THE AVERAGE USER L'avatar di tranky
    Date Of Registration
    Aug 2015
    The resort
    Alfa147Land
    Messages
    702
    Citazione Originally Written by cinqueturbo Visualizza Messaggio
    Change the pad holding force with the fork and the axle shaft long side one has the flange and the other a thousand teeth inside the differential..

    attack media? Boo
    Thanks for the reply friend.. To view looks very similar, but comparison sites on these things does not yet exist.
    Then what you say means that, not being able to (or you?) change the parts you said, they can't do a caper...
    Live ****** & you Die a HERO !

  2. #2
    THE AVERAGE USER L'avatar di cinqueturbo
    Date Of Registration
    Sep 2012
    The resort
    The Milky Way
    Messages
    2,407
    Citazione Originally Written by tranky Visualizza Messaggio
    Thanks for the reply friend.. To view looks very similar, but comparison sites on these things does not yet exist.
    Then what you say means that, not being able to (or you?) change the parts you said, they can't do a caper...
    I say that you need both the Gears removed to make a comparison fairly accurate, and if you also have the drive shafts and even better..
    if I was sure I wrote to you go quiet!!
    but no I can't be seen that one has the wheel cylinder hydraulic inside and another outside, in addition to the difference in the engagement of the drive shaft the long, the short one I don't remember to me..
    "The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."

  3. #3
    THE AVERAGE USER L'avatar di tranky
    Date Of Registration
    Aug 2015
    The resort
    Alfa147Land
    Messages
    702
    Citazione Originally Written by cinqueturbo Visualizza Messaggio
    I say that you need both the Gears removed to make a comparison fairly accurate, and if you also have the drive shafts and even better..
    if I was sure I wrote to you go quiet!!
    but no I can't be seen that one has the wheel cylinder hydraulic inside and another outside, in addition to the difference in the engagement of the drive shaft the long, the short one I don't remember to me..
    I was hoping a lot on the "go quiet"
    Just do the comparison you update.. Time to prepare the clutch reinf. and I remove everything.. Thanks for the time
    Live ****** & you Die a HERO !

Tags for This Discussion

Write permission

  • You you can not post new threads
  • You you can not send answers
  • You you can not send attachments
  • You you can not edit your posts
  •