Turbo pressure fiat 500.

[msport (exil77grande)]

******** tells me that or is it the sensor or the turbine itself

correct then proceed as suggested.

[lui93]

sensor ok!!
so I'd say turbine.
if you change only the fan instead of the whole turbo ?

[giuseppe89]

It first checks to see if the shaft of the vgt flows well or is jerky...in this case, disassemble the entire turbine, and checks the geometry,if it is just clogged clean it well or lubrificala up to slide freely.

[lui93]

Thanks a lot joseph, you are very hot in the room, tonight I will try doing it that way.
tonight I will post anke the modified file

cinquecentoturbo tonight can you please post the file so give it a look if you have a moment of time

[pippo65]

It first checks to see if the shaft of the vgt flows well or is jerky...in this case, disassemble the entire turbine, and checks the geometry,if it is just clogged clean it well or lubrificala up to slide freely.

Hello Giuseppe,but the 500-75 hp has the multitude of variable geometry?
I thought I was not.

[the shiston]

It is easy to see if it is varying or not. Open the hood and see above the turbine if the wastegate valve if you have variable

[carfree]

cinquecentoturbo tonight can you please post the file so give it a look if you have a moment of time

but is the white smoke out the machine, see the charge-air cooler ce oil ?
Will I sensor or valve westagate

[lui93]

the 75 no, the 95, and has variable geometry if I'm not mistaken.

[the shiston]

Even the 90 hp to 100%

[lui93]

I confirm the shiston, I made it today in the afternoon a