the fiat brava jtd 105 year 99

[cinqueturbo]

Hello cinqueturbo "boot!" na word and as you do in boot is the controller-the edc1
5c5 )thanks

EDC15C5?? Sorry I had also read in the discussion that he is not OBD2, but the old socket, 3-Pin, sorry..

[ugoboss]

However tramky I used the ecm to do a copy paste of the maps, now I'll explain what I did so you can tell me if I have done everything in the right way:
Open flash the ecu modified in a window of the ecm and in the other the fllash of the original, on the right of the one you modified they were, injection, injection partial and three other entries, and I deduced that they were changed maps, then I opened a map once and I did save the map data for all of the 5 or 6 maps now I can't remember, then from the ecm, in which was opened the original flash I clicked on the maps to the right and I did open the map data, and then update, this for all the 5 or 6 maps using the map data stored by the ecu mod, I eventually made the save and exported as a file that is modified.
now the checksum is different, and when I open this file but it's not me, it recognizes it automatically with the driver first.
I've done in the proper way? still missing the other before trying to send it to the ecu?
Thanks

post the three files so as to give it an eye if you did a good job.

[sandros]

post the three files so as to give it an eye if you did a good job.

I have attached the file as you requested, however I have sent the file to the original unit and everything went well, at least for now as I do not know if the map at the end evenuta well or not.

[ugoboss]

the maps that you have copied is good (in the sense that you have copied well) you left out two after the injection choked that the "preparer" has changed, I do not like them as a change but glad you.

[sandros]

I have tried d copy the maps...***** and I said they are the first similar experience, and I don't yet know anything about this industry...with the ecm changed maps I copied all then I do not know how to improve.....you could maybe send you a correction to your liking given that you are not satisfied? I was able to try only the map without confeontarla with other

[tranky]

I have tried d copy the maps...***** and I said they are the first similar experience, and I don't yet know anything about this industry...with the ecm changed maps I copied all then I do not know how to improve.....you could maybe send you a correction to your liking given that you are not satisfied? I was able to try only the map without confeontarla with other

On ECM load the file ORI and MOD and opening the view in 2D button at the top with the drawing of a diagram) have the scroll bar in the bottom with various buttons to quickly scroll, the beginning the end, etc..
Place the bar that scrolls with the mouse on the graph to the center of the screen to view in 2d, lowering the mouse (so as to leave the "bar" black to the center of the screen) go on the chevrons colored blue and red, and premile with the right mouse button.
You'll see that you only in the points of difference between the two maps, pressing them instead with the left mouse button will scroll faster and it is difficult for individuals individual points of differences..
Do a little practice with the program before you want to fly without knowing how to walk.. one step at a time

[sandros]

Thanks a lot tranky....I'm trying to learn slowly I am reading everything but being things that have no logical connection x now I'm understanding a little....to copy the maps I had made, so:
Open two windows of the ecm....in a map changed by the preparer in the other the original read with the cock..then working on the one you modified in the table, I did save the map data for all of the changes that the ecm was showing me to the right....then past in the original one clicked on the various items, and dx and made open map data that I had saved.
At the end of the exported file.
Some good guidelines to begin to read and understand something in general about the units me, can you please advise?

[tranky]

Thanks a lot tranky....I'm trying to learn slowly I am reading everything but being things that have no logical connection x now I'm understanding a little....to copy the maps I had made, so:
Open two windows of the ecm....in a map changed by the preparer in the other the original read with the cock..then working on the one you modified in the table, I did save the map data for all of the changes that the ecm was showing me to the right....then past in the original one clicked on the various items, and dx and made open map data that I had saved.
At the end of the exported file.
Some good guidelines to begin to read and understand something in general about the units me, can you please advise?

unfortunately, in order to understand the maps you have to initially rely on a unique kind of electronic unit and do not mix..
for example, the range bosch there are various models edc15, edc16, etc.. but none is a mirror image.. each one is made in its own way.
Since here we are talking about edc15 parts from those and info about you in myriads here on the site, both for the who nomenclature for the edit mode.
I unfortunately do not know them very well since I'm on edc16, but I assure you that the job is very simple compared to edc16.
You should start to learn first of all the use of ecm and if you search on g00gle you will find a file "guide to the use of the ecm" that already gives you an initial help, then steps to the "basic guide to the electronic processing of engines" that explains the "caring" what and how to do it.
Consider that the most constructive experience are you experiencing, and when, or in the forum or via the logs that make up the car.
For the rest you ask and let's see if you can help but start to do something that isn't a copy and paste without logic.
By a read to this topic, as the beginning is very good:
http://www.professionalchiptuning.ne...stechiometrico
Good job friend

[sandros]

Thanks a lot....I'll read what I've suggested and for sure something imparero ....