ecm titanium

[gianlucacll]

Perhaps the easiest thing to learn would be to find a friend who has the same drive mapped and read to her, then in the ecm comparisons and see where they went to intervene... In 2D it is very clear if we take the hand...
And then be careful because the damage is done is a moment... The best thing would be to get yourself a nice backup in BDM, but I think that for you that you are a novice it will be complicated...
If you want to experiment I were you, not toccherei the geo and I would act with caution on the limits and turbo pressure, and the rail. You will see improvement...
Good job!

[s.tuning89]

Yes sn novice infs

[s.tuning89]

Yes sn novice only Ke golf Iv changed my nn there are more 😊 then I'm reading a bit of forum x to understand... Xo, sincerely I thought it was so complicated

[ugoboss]

it is much more complicated than you think.

[s.tuning89]

And I see there I am passing many nights x understand something

[s.tuning89]

I did as you said yourself and improved thanks of the council

[s.tuning89]

Sorry vuolevolta load the maps xo I don't know how to upload them

[gianlucacll]

Sorry vuolevolta load the maps xo I don't know how to upload them

????? That is,?? Time is a software to remove the dpf and sometimes does more damage than anything else... To the limit with the one change, then save it with another name etc...
To write uses what you used to read.
Then maybe I do not understand what to ask...

[tranky]

Advice from those who like you started from scratch.. learn step by step the ecu..
Find out what are all the maps that are affected by change and what they do really;
And then moves on to discover what you can get from that engine
Then walk to find out what are the limiters
Passing a bit of time in search of this info in 2D learn a very photographic memory and you'll see that in no time you are going to do some work.
I don't recommend you strongly to upload changes without which none you have viewed the file, you risk in addition to enter in recovery, to break something given the constraints of the devices such as turbine, pump, rail and whatever else.
Good luck!

[s.tuning89]

Thanks for the advice guys kiedevo how to attach the file x have you look at the changes to the maps as well to see if they are in good way I'm doing it all wrong