generic software for ELM 327

[ugoboss]

Yes the resistor needs to be removed otherwise it should not be..no I have put a switch on the diverter of the classic ones with changes from normal to yellow cable to enter the body so it is more practical..but if you are looking for c is also a video guide on the tube

do you have a picture of the resistance to remove, or a precise indication ,thanks.

[DavideO]

Screenshot_2016-04-18-11-32-31.jpgthis is a complete scheme of the connections that you from the official website.. here are several useful information with regard to the cables, the connections they have on the inside, compatibility, etc..

[X4N]

I saw that there are welding to do..and I have no equipment.
To be able to reset service etc, which adapter should I take? I have an elm327 clone.
Thanks

[DavideO]

For the 147 you have to enter in the body you need the yellow cable, but before taking the test without some elm connect already with the k line

[X4N]

For the 147 you have to enter in the body you need the yellow cable, but before taking the test without some elm connect already with the k line

I have an ELM327 v1.5, but could you tell me if the free version of multiecuscan can do that?

[todos]

I have an ELM327 v1.5, but could you tell me if the free version of multiecuscan can do that?

you the free version works with ELM327 v1.5 but very limited...

[DavideO]

I don't have multiecuscan I can not say..I personally l elm l I've only used it on android devices..in my c was a cd with the programs I have installed, but I never got to try it..if there is you have you might see if you can with those programs..

[DavideO]

20160418_105309.jpg this is my! the resistance is named r04 I tried to put an arrow with the pencil tool should be nowhere in sight! not all of the elm are the same, however, is the one between pin 6 and 14 following the tracks you should find it easily!

[ugoboss]

20160418_105309.jpg this is my! the resistance is named r04 I tried to put an arrow with the pencil tool should be nowhere in sight! not all of the elm are the same, however, is the one between pin 6 and 14 following the tracks you should find it easily!

thanks david.

[DavideO]

Nothing!