Problem airbag Twingo 2007

[gianni1001]

Good morning to all
excuse my ignorance
my question of today relates to an airbag control unit of a twingo 2007.
the control unit AIRBAG_ CONTINENTAL TEMIC
8200 38 50 75
402787A9
HW 40\05
and' possible to riverginare these units ?
let me explain better ,it would be possible to replace with one from another car is not accident-free, and then riprogrammarla and redo the alignment proxy?
if the original file of the e2p was lost or deleted, there is the possibility to find it or derive it ?or I throw away the controller?
Thank you good day to all

[tranky]

From what I know you can replace that unit as long as they have the same codes and without any problem.
For the alignment you need to make a "clean" of the ecu replaced, and resolve with the diagnosis.
Hello

[gianni1001]

ah ok
then I will get a new with same codes
I read the e2p
wipe it clean with software x drivers
the refit and do the alignment proxy
and I should solve.
Thanks a lot ,I will try and will update if it works
A good day

[tranky]

You think that the process you described is correct.
Let us know that you will always learn something
Thanks

[BlackFog]

By the way, the alignment proxy of the airbag control unit.. has it ever happened that during the alignment proxy has broke out a few drivers?

[sno74]

Sorry, but what can center the burst airbag with alignment proxy for me, nothing to see.............

[tranky]

Sorry, but what can center the burst airbag with alignment proxy for me, nothing to see.............

You must have used a diagnostic cable of the ISIS..

[gianni1001]

Here I am
Fixed
I took a airbag control unit used
I read the e2p, I did the clean and I installed.
The game on the first shot.
Unfortunately, the e2p from the old airbag control unit has been read or written in a wrong way, and then had lost all the necessary information.
Tomorrow I try to mount the old centralin drivers with the e2p recopied and look if it works.
If so, just save a file and make a database of a control unit the same, and if it happens you are affixed...
Will update, thanks
Tomorrow

[BlackFog]

To me it never happened is nothing of the kind, but speaking with a friend who works in fiat I raccontó that happened such a thing.

[gianni1001]

I confirm also that it works is the ECU the original drivers by copying the e2p from the one used and cleaned up with software.