Info on iaw 4af.sp and iaw af.s2

[walter_ie]

Hello guys I wanted to ask you an info. I have a panda in the workshop fitted with a ecu IAW 4AF.S2 / HW407 /20B8-WHH I suppose is burned, I in the house I have only a IAW 4AF.SP / HW 407 /20B8-W6G always a panda, according to you, can I scodificarla and install it, or clone it and install on vettuura?? Thanks for the help!!

[walter_ie]

Guys nobody is giving me a hand??

[Andrea1]

hello, if the hardware is the same you can write the software from the old to the new but if the ecu is fried I don't know if you can read it.

[walter_ie]

Thanks for the response, my problem is... that I can not read it. According to you if the scodifico and jot down can you go?

[Andrea1]

Honestly it would be something that I would avoid but I had the same problem and despite the number of sw is different the machine runs as before.
So if the scodifichi and the mountains could go, but I think my was a great stroke of luck.

[walter_ie]

Hello, andrea1 sorry if I made you feel but I was a little taken by the work, however I solved, I scodificato and put down I and is game!! For once I had the stroke of luck too!!!

[Andrea1]

very good I would say!

[BlackFog]

No quiet boys is not luck hahah is the IAW 4AF.SP / HW 407 /20B8-W7G if scodificata mounts easily 😄

[Andrea1]

then the iaw if they have the same number of hw are all interchangeable? you could compare the files of the sw different to make a comparison... you try?

[walter_ie]

I have mounted a SP instead of a S2, however, I think that vice versa is not possible, because the S2 is newer than the other, and would have some fault even if you start there, type how to mount an M2 instead of M3 that you can, and vice-versa no!!!