Page 5 of 6 PrimaBefore ... 3456 LastUltima
Results 41 to 50 of 51

View Hybrid

  1. #1
    BEGINNER
    Date Of Registration
    Aug 2012
    The resort
    prov. Bari
    Messages
    61
    no you do not have to start from 0D5344 to 0D5360, but you have to select exactly the two addresses indicated by msport, it is clear, then when you go to make sure you'll see it from 0D5344 but it is not from them that you need to change, absolutely no......

  2. #2
    BEGINNER
    Date Of Registration
    Aug 2012
    The resort
    prov. Bari
    Messages
    61
    sorry but I can not find on our forum section dedicated to the cable vcds, someone can help me????

  3. #3
    THE AVERAGE USER
    Date Of Registration
    Sep 2012
    Messages
    535
    Take a look in the section on diagnosis.
    However, as I said I check the first control egr.

  4. #4
    Administrator L'avatar di msport (exil77grande)
    Date Of Registration
    Jun 2012
    The resort
    Chiplandia
    Messages
    4,817
    for me it's ok, the first control.
    [IMG]http://bannerbreak*****/banners/3/563/135700419269659378.gif[/IMG]

  5. #5
    THE AVERAGE USER
    Date Of Registration
    Sep 2012
    Messages
    535
    A zero cos?????

    the egr first controllo.jpg

  6. #6
    Administrator L'avatar di msport (exil77grande)
    Date Of Registration
    Jun 2012
    The resort
    Chiplandia
    Messages
    4,817
    Citazione Originally Written by cawadany Visualizza Messaggio
    certainly, because according to you, no?
    [IMG]http://bannerbreak*****/banners/3/563/135700419269659378.gif[/IMG]

  7. #7
    THE AVERAGE USER
    Date Of Registration
    Sep 2012
    Messages
    535
    Citazione Originally Written by msport (exil77grande) Visualizza Messaggio
    certainly, because according to you, no?
    In the box dec should not be zero?

  8. #8
    Administrator L'avatar di msport (exil77grande)
    Date Of Registration
    Jun 2012
    The resort
    Chiplandia
    Messages
    4,817
    Citazione Originally Written by cawadany Visualizza Messaggio
    In the box dec should not be zero?
    exact should be 0 but I don't understand how did he give -100% increase and stay at 1 dec that then it would be a 1 point decrease and made perhaps because he has done manually, and as I explained in the second point in time by selecting from x to y and click on the m lower-case,however, I think that even so, it was closed but it's just correct it.
    [IMG]http://bannerbreak*****/banners/3/563/135700419269659378.gif[/IMG]

  9. #9
    BEGINNER
    Date Of Registration
    Aug 2012
    The resort
    prov. Bari
    Messages
    61
    I'm back here guys, because I'm a little more seasoned of you, but I have always been attracted to the phobia of the tuning. I wanted to ask do you think with the EGR closed, the temperature of the radiator water ragiunge the regime of 90 degrees more or less at the time???? According to me there put? pi? since the exhaust gases are already? warm if not pass into the intake manifold and in the combustion chamber where, in this way, arriver? only the cold air of the interculer, or mistake, thanks to those who interverr

  10. #10
    Administrator L'avatar di msport (exil77grande)
    Date Of Registration
    Jun 2012
    The resort
    Chiplandia
    Messages
    4,817
    it is, in fact, should impigare something more to reach the temperature,however, if you read just above the user cawadany noted that the first control that will surely modificavi in a different manner than my explanation has a slight error that you should fix.
    [IMG]http://bannerbreak*****/banners/3/563/135700419269659378.gif[/IMG]

Page 5 of 6 PrimaBefore ... 3456 LastUltima

Write permission

  • You you can not post new threads
  • You you can not send answers
  • You you can not send attachments
  • You you can not edit your posts
  •